New Quadra APRS Installation

#8602

Greetings,
I am setting up a Quadra computer for APRS. I have the YAAC? client installed and working with? APRS-IS, now I need to connect a radio. I have installed direwolf for the modem. Now, I have two issues.

First, the audio interface. This is a no budget setup so something like Signalink is out of the question. I've got a couple cheap USB audio interfaces that have mic in and speaker out jacks. Will those work with direwolf?

Second is PTT. The Quadra has no I/O pins or serial port to trigger the PTT. The radio does not have VOX, which I would not use anyway.

Next, is direwolf usable with other digital modes than packet/APRS, like fldigi or WSJT-X?

Thanks for any suggestions/advice.

73,
Michael WA7SKG

Re: K7MBBS-4 audio level = 19(4/4) 000000___ --> ??

#8601

开云体育

Hello Thomas,

maybe someone can answer me the question please, I didn't find anything in the documentation.

What do the zeros mean in the line?
K7MBBS-4 audio level = 19(4/4)? ? 000000___

K7MBTS audio level = 99(32/21)? ? __|||||__

You have enabled FX.25 reception and that's showing that 0 bits were corrected in each of the slicers described here on page 9:

??

--David
KI6ZHD

K7MBBS-4 audio level = 19(4/4) 000000___ --> ??

#8600

Hello,
maybe someone can answer me the question please, I didn't find anything in the documentation.

What do the zeros mean in the line?
K7MBBS-4 audio level = 19(4/4)? ? 000000___

K7MBTS audio level = 99(32/21)? ? __|||||__

THX

Re: Building on Mac

#8599

Thanks for the reply,

Looks like that worked :)

Show quoted text

Running tests...
Test project /Users/user/Documents/sources/direwolf/build-test
????? Start? 1: dtest
?1/24 Test? #1: dtest ............................?? Passed??? 5.09 sec
????? Start? 2: ttest
?2/24 Test? #2: ttest ............................?? Passed??? 0.16 sec
????? Start? 3: tttexttest
?3/24 Test? #3: tttexttest .......................?? Passed??? 0.09 sec
????? Start? 4: pftest
?4/24 Test? #4: pftest ...........................?? Passed??? 0.08 sec
????? Start? 5: tlmtest
?5/24 Test? #5: tlmtest ..........................?? Passed??? 0.08 sec
????? Start? 6: lltest
?6/24 Test? #6: lltest ...........................?? Passed??? 0.08 sec
????? Start? 7: enctest
?7/24 Test? #7: enctest ..........................?? Passed??? 0.07 sec
????? Start? 8: kisstest
?8/24 Test? #8: kisstest .........................?? Passed??? 0.10 sec
????? Start? 9: pad2test
?9/24 Test? #9: pad2test .........................?? Passed??? 0.12 sec
????? Start 10: xidtest
10/24 Test #10: xidtest ..........................?? Passed??? 6.11 sec
????? Start 11: dtmftest
11/24 Test #11: dtmftest .........................?? Passed??? 0.14 sec
????? Start 12: check-fx25
12/24 Test #12: check-fx25 .......................?? Passed??? 1.04 sec
????? Start 13: check-il2p
13/24 Test #13: check-il2p .......................?? Passed??? 0.32 sec
????? Start 14: check-modem1200
14/24 Test #14: check-modem1200 ..................?? Passed??? 4.04 sec
????? Start 15: check-modem1200-i
15/24 Test #15: check-modem1200-i ................?? Passed??? 1.80 sec
????? Start 16: check-modem300
16/24 Test #16: check-modem300 ...................?? Passed??? 8.20 sec
????? Start 17: check-modem9600
17/24 Test #17: check-modem9600 ..................?? Passed??? 0.34 sec
????? Start 18: check-modem9600-i
18/24 Test #18: check-modem9600-i ................?? Passed??? 0.85 sec
????? Start 19: check-modem19200
19/24 Test #19: check-modem19200 .................?? Passed??? 0.31 sec
????? Start 20: check-modem2400-a
20/24 Test #20: check-modem2400-a ................?? Passed??? 2.21 sec
????? Start 21: check-modem2400-b
21/24 Test #21: check-modem2400-b ................?? Passed??? 2.24 sec
????? Start 22: check-modem2400-g
22/24 Test #22: check-modem2400-g ................?? Passed??? 0.40 sec
????? Start 23: check-modem4800
23/24 Test #23: check-modem4800 ..................?? Passed??? 1.42 sec
????? Start 24: check-modemeas
24/24 Test #24: check-modemeas ...................?? Passed??? 0.26 sec

100% tests passed, 0 tests failed out of 24

Total Test time (real) =? 35.57 sec

Re: Cross Fix to ALSA-LIB and GPIO PTT issues

#8598

Hi Dave,
? I went over the ptt.c file and compared the debug output I had for the Direwolf startup. There didn't seem to be any errors as it follows the libgpiod syntax completely. My guess right now is that the GPIO pins aren't identified in the dtb table for the kernel startup. I've translated three versions and see no reference in the dtc's for a simple GPIO I/O interface on the external pins. Most of the defined pins are used for chip-chip interaction. So now I have to "re-invent the wheel" and do a dtc blob for my GPIO-19 pin on gpio@209c000 (the first bank of GPIO modules) and a gpiopin@209c000 definition with the needed pinctrl and pin-gpios data. The iMX6 reference data from Technexion is forthcoming as I've hung on my access and login, TBD. Unfortunately the other iMX6 ARM users don't leave their dtc files lying around for me to plagiarize.

Hasta,
Dave
KI6KPP

Re: Building on Mac

#8597

On Sat, Aug 26, 2023 at 11:52 PM, kitonthenet wrote:

Are there some tests I can do to check for regressions?

Yes, there are automated regression tests.

$ cmake -DUNITTEST=1 ..
$ make
$ make test

A Mac development expert (which I am not) will need to address the other concerns.

73,
John WB2OSZ

Re: TX and no audio ?

#8596

This might be helpful for getting fldigi to work with an IC-7300.

?

Re: TX and no audio ?

#8595

Help me to understand this please. I cannot tx to the IC-7300 from Fldigi. Is the 00 the problem? Thanks for your help.?

Screenshot from 2023-08-28 11-08-54.png

Re: TX and no audio ?

#8594

开云体育

Good morning, John,

Yes indeed I noticed that

now he is at ?? MM???

Thanks for your help

I learned something else, how to properly adjust our audio

Thank you and good day

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

https://www.facebook.com/groups/ve2cva

Instagram :?https://www.instagram.com/ve2cva/

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400

Show quoted text

Le 28 ao?t 2023 à 11:25, WB2OSZ <wb2osz@...> a écrit :

I have found that receive works better if mic AGC is turned off.

<dummyfile.0.part>

These tips are in the Troubleshooting section of:?

73,
John WB2OSZ

Re: TX and no audio ?

#8593

I have found that receive works better if mic AGC is turned off.

These tips are in the Troubleshooting section of:?

73,
John WB2OSZ

Re: TX and no audio ?

#8592

开云体育

Good morning, John,

OK, actually I didn't know that it was wrong to put the number ??00 ? at the bottom of the sliders

Ha Ha, yes, it's working fine now

Thanks for your help

here's a photo

here is a picture

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

https://www.facebook.com/groups/ve2cva

Instagram :?https://www.instagram.com/ve2cva/

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400

Show quoted text

Le 28 ao?t 2023 à 09:56, WB2OSZ <wb2osz@...> a écrit :

Do you see MM or 00 here in alsamixer?

<dummyfile.0.part>

If you have MM, that means muted.? Press m to change.

Re: TX and no audio ?

#8591

Do you see MM or 00 here in alsamixer?

If you have MM, that means muted.? Press m to change.

Re: TX and no audio ?

#8590

开云体育

Hello Andre,

I bought 10 CM-108 so one for my first I-GATE site which works well

I am attaching a photo of my CM-108 key, because a picture is worth a thousand words

there I want to build another one and I have no audio ???

I don't think it's a counterfeit, it's written CM-108 on the chip

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

https://www.facebook.com/groups/ve2cva

Instagram :?https://www.instagram.com/ve2cva/

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400

Show quoted text

Le 28 ao?t 2023 à 08:21, Andrew P. <andrewemt@...> a écrit :

Luc,

Do you have a real CM108? Or one of the counterfeits (where they conveniently put a dab of paint on the chip so you can't read the part number)? I have found that the counterfeits can jam up and refuse to work. The only solution is to literally unplug the USB connection so the board powers off, then reconnect it. If that doesn't work, get another device. The counterfeits fail easily.

Andrew, KA2DDO

________________________________________
From:?[email protected]?<[email protected]> on behalf of Luc Drolet VE2LUQ <ldrolet@...>
Sent: Monday, August 28, 2023 5:47 AM
To:?[email protected]
Subject: Re: [direwolf] TX and no audio ?

Hello Jonh,

Yes, I also adjust the volume to the maximum
and there is still no sound in my headphones on the CM-108

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...
https://www.facebook.com/groups/ve2cva
Instagram : https://www.instagram.com/ve2cva/
Echolink = ??VE2RVA-R ???NODE #24560
Sécurité Civil du Québec, Node #1400

Le 27 ao?t 2023 à 21:54, WB2OSZ <wb2osz@...> a écrit :

Did you set the output volume and ensure it is not muted?

Re: TX and no audio ?

#8589

Luc,

Do you have a real CM108? Or one of the counterfeits (where they conveniently put a dab of paint on the chip so you can't read the part number)? I have found that the counterfeits can jam up and refuse to work. The only solution is to literally unplug the USB connection so the board powers off, then reconnect it. If that doesn't work, get another device. The counterfeits fail easily.

Andrew, KA2DDO

________________________________________
From: [email protected] <[email protected]> on behalf of Luc Drolet VE2LUQ <ldrolet@...>
Sent: Monday, August 28, 2023 5:47 AM
To: [email protected]
Subject: Re: [direwolf] TX and no audio ?

Hello Jonh,

Yes, I also adjust the volume to the maximum
and there is still no sound in my headphones on the CM-108

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

Instagram : 
Echolink =   VE2RVA-R    NODE #24560
Sécurité Civil du Québec, Node #1400

Le 27 ao?t 2023 à 21:54, WB2OSZ <wb2osz@...> a écrit :

Did you set the output volume and ensure it is not muted?

Re: TX and no audio ?

#8588

开云体育

Hello Jonh,

Yes, I also adjust the volume to the maximum

and there is still no sound in my headphones on the CM-108

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

https://www.facebook.com/groups/ve2cva

Instagram :?https://www.instagram.com/ve2cva/

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400

Show quoted text

Le 27 ao?t 2023 à 21:54, WB2OSZ <wb2osz@...> a écrit :

Did you set the output volume and ensure it is not muted?

Re: TX and no audio ?

#8587

开云体育

I have a few sections in my doc starting at that should help here to test your CM108 sound device with using standard sound tools, etc.? Give that a try and report back if you get it working.

--David
KI6ZHD

On 08/27/2023 02:40 PM, Luc Drolet VE2LUQ wrote:

Show quoted text

Hello David,

Wow, indeed, good idea to check the performance of my CM108, I hadn't thought of that

but sorry there is no audio output from my CM108

Direwolf -x a

I can't hear anything in my headphones

in Direwolf I also activated the CWID and I can't hear the CW ID either

meaning again it could be the SD CARD

What do you think?

Thanks for your much appreciated help.

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

Instagram :?

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400

Le 27 ao?t 2023 à 17:17, David Ranch <direwolf-groupsio@...> a écrit :

I would connect some headphones to the output of the CM108 device and then check the device's playback mixer settings.

--David
KI6ZHD

On 08/27/2023 02:10 PM, Luc Drolet VE2LUQ wrote:

Hello everyone,

I already have an I-GATE on top of a mountain

and I want to make another one with DIREWOLF

and i have a little problem

for the RX it's going well it works well in my opinion

But for the TX

it transmits a carrier without audio?

I redid another "CM108" and same problem, I redid my SD card that I use on my Raspberry PI,

always the same problem

I have a carrier without having the data on the modulation

I see 144.390 Mhz the carrier but without any modulation on this carrier

Can you help me,

I think it could be an SD card, but I'm not sure.

Thank you all for your help

Good evening

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

Instagram :?

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400

Re: TX and no audio ?

#8586

Did you set the output volume and ensure it is not muted?

Re: TX and no audio ?

#8585

开云体育

Hi David,

only for more info

here is the version of my Direwolf

thank you and good evening

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

https://www.facebook.com/groups/ve2cva

Instagram :?https://www.instagram.com/ve2cva/

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400

Show quoted text

Le 27 ao?t 2023 à 17:40, Luc Drolet VE2LUQ <ldrolet@...> a écrit :

Hello David,

Wow, indeed, good idea to check the performance of my CM108, I hadn't thought of that
but sorry there is no audio output from my CM108

Direwolf -x a
I can't hear anything in my headphones

in Direwolf I also activated the CWID and I can't hear the CW ID either

meaning again it could be the SD CARD
What do you think?

Thanks for your much appreciated help.

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...
Instagram :?
Echolink = ? VE2RVA-R ? ?NODE #24560
Sécurité Civil du Québec, Node #1400

Le 27 ao?t 2023 à 17:17, David Ranch <direwolf-groupsio@...> a écrit :

I would connect some headphones to the output of the CM108 device and then check the device's playback mixer settings.

--David
KI6ZHD

On 08/27/2023 02:10 PM, Luc Drolet VE2LUQ wrote:
Hello everyone,

I already have an I-GATE on top of a mountain
and I want to make another one with DIREWOLF
and i have a little problem
for the RX it's going well it works well in my opinion

But for the TX
it transmits a carrier without audio?

I redid another "CM108" and same problem, I redid my SD card that I use on my Raspberry PI,
always the same problem
I have a carrier without having the data on the modulation
I see 144.390 Mhz the carrier but without any modulation on this carrier

Can you help me,
I think it could be an SD card, but I'm not sure.

Thank you all for your help

Good evening

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...
Instagram :?
Echolink = ? VE2RVA-R ? ?NODE #24560
Sécurité Civil du Québec, Node #1400

Re: TX and no audio ?

#8584

开云体育

Hello David,

Wow, indeed, good idea to check the performance of my CM108, I hadn't thought of that

but sorry there is no audio output from my CM108

Direwolf -x a

I can't hear anything in my headphones

in Direwolf I also activated the CWID and I can't hear the CW ID either

meaning again it could be the SD CARD

What do you think?

Thanks for your much appreciated help.

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

https://www.facebook.com/groups/ve2cva

Instagram :?https://www.instagram.com/ve2cva/

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400

Show quoted text

Le 27 ao?t 2023 à 17:17, David Ranch <direwolf-groupsio@...> a écrit :

I would connect some headphones to the output of the CM108 device and then check the device's playback mixer settings.

--David
KI6ZHD

On 08/27/2023 02:10 PM, Luc Drolet VE2LUQ wrote:

Hello everyone,

I already have an I-GATE on top of a mountain

and I want to make another one with DIREWOLF

and i have a little problem

for the RX it's going well it works well in my opinion

But for the TX

it transmits a carrier without audio?

I redid another "CM108" and same problem, I redid my SD card that I use on my Raspberry PI,

always the same problem

I have a carrier without having the data on the modulation

I see 144.390 Mhz the carrier but without any modulation on this carrier

Can you help me,

I think it could be an SD card, but I'm not sure.

Thank you all for your help

Good evening

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

Instagram :?

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400

Re: TX and no audio ?

#8583

开云体育

I would connect some headphones to the output of the CM108 device and then check the device's playback mixer settings.

--David
KI6ZHD

On 08/27/2023 02:10 PM, Luc Drolet VE2LUQ wrote:

Show quoted text

Hello everyone,

I already have an I-GATE on top of a mountain

and I want to make another one with DIREWOLF

and i have a little problem

for the RX it's going well it works well in my opinion

But for the TX

it transmits a carrier without audio?

I redid another "CM108" and same problem, I redid my SD card that I use on my Raspberry PI,

always the same problem

I have a carrier without having the data on the modulation

I see 144.390 Mhz the carrier but without any modulation on this carrier

Can you help me,

I think it could be an SD card, but I'm not sure.

Thank you all for your help

Good evening

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

Instagram :?

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400