Le 27 ao?t 2023 à 17:40, Luc Drolet VE2LUQ <ldrolet@...> a écrit :

Hello David,

Wow, indeed, good idea to check the performance of my CM108, I hadn't thought of that

but sorry there is no audio output from my CM108

Direwolf -x a

I can't hear anything in my headphones

in Direwolf I also activated the CWID and I can't hear the CW ID either

meaning again it could be the SD CARD

What do you think?

Thanks for your much appreciated help.

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

Instagram :?

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400

Le 27 ao?t 2023 à 17:17, David Ranch <direwolf-groupsio@...> a écrit :

I would connect some headphones to the output of the CM108 device and then check the device's playback mixer settings.

--David
KI6ZHD

On 08/27/2023 02:10 PM, Luc Drolet VE2LUQ wrote:

Hello everyone,

I already have an I-GATE on top of a mountain

and I want to make another one with DIREWOLF

and i have a little problem

for the RX it's going well it works well in my opinion

But for the TX

it transmits a carrier without audio?

I redid another "CM108" and same problem, I redid my SD card that I use on my Raspberry PI,

always the same problem

I have a carrier without having the data on the modulation

I see 144.390 Mhz the carrier but without any modulation on this carrier

Can you help me,

I think it could be an SD card, but I'm not sure.

Thank you all for your help

Good evening

Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva@...
ldrolet@...

Instagram :?

Echolink = ? VE2RVA-R ? ?NODE #24560

Sécurité Civil du Québec, Node #1400