开云体育

Ron, did you have any luck with this problem? I tried moving the libexec stuff to the Mac from the source but it gets an exception when it tries to run.

Excuse for the other post, YES, The same may apply in the IC 7100, likely ... TEST & TEST

Actually it's controlled by the mouse -- it's a Dell laptop with a built-in pad, or whatever you call it....

Well, guess what ? It is indeed possible using the USB connection on the back of the 9100. My problem was in specifying the correct PORT. While configuring the radio, it will give you more than

Anyone in this group running D-RATS on their 9100 using the USB connection ? I would appreciate a once-over regarding settings on the PC and radio. Thanx. Dave, KF0XQ

A little late on the reply Patrick, but thank you for sharing your experiment. This is something that I've been meaning to experiment with myself! Good stuff!! 73, Brad KA3YAN

Cody, We have been using MIXW and MT63 for digital on 2M, however now we have our DSTAR repeaters all up and running,2M, 440, and 1.2Ghz so we will start using those more as time and skills permit.

Thank you all for your help, once you pointed me I the right direction I was good to go! Authentication works just fine, all is good here in New Mexico! Thanks again! Al KF5SMH

Al, Ok, i see your confusion, I am not sure why the program is crashing on the PI so here is where the file is in Linux when you login in you should be in your home directory if you type: cd

Cody, Yes, that is correct there is an edit button but in my RPI installation every time I click it the program shuts down. I do not believe that to be correct but I do not know where to go to fix

Al, I took a look at my installation and there is a button on the D-Rats Repeater Proxy config screen that says EDIT . that is the way to edit your file, just put in your info and save. Does that

I WOULD LIKE TO PUT AN AUTHENTICATION REQUIREMENT ON MY DRATS RUNNING ON MY RPI. PROBLEM IS I AM NOT WELL VERSED YET IN PI, AND I AM CONFUSED BY THE STATEMENT: On Linux or MacOS it will go in the

Test Again! Ralph Barbakoff (W9BGX operated by WA9LKZ) ________________________________ To: "d-rats_group@..." <d-rats_group@...> Sent: Saturday, January 24, 2015 3:55

Test Ralph Barbakoff (WA9LKZ) ________________________________ To: "d-rats_group@..." <d-rats_group@...> Sent: Saturday, January 24, 2015 3:55 PM Subject: Re: [d-rats_group]

Roland, Glad you got it going. It's usually the little things! Mike, N0SO

I can connect our 2m DSTAR to refl 15C, the digi refl, and I would like to connect to someone via that mode to see if it works. My email is w3fdk@... or rolan.clark@... Take

Mike and all, WOW, I fixed it !! It couldn't have been a loose solder connection in the DB9 plug could it HI HI yep it sure was, the shield to pin 5 was intermittenly touching, it was loose.

Mike, Thanks for the suggestions and yes the settings you mentioned are set right and sometimes it does tx when I click on ping or send text, that is it used to, in the last few hours I can't get

Mike, I can't answer about sending data with manual ptt as there is no one to receive what I send. I'll try to round up someone with d-rats to see if it is sending. Thanks much, 73 de rolan

Does it send data OK if you manually actuate the PTT? If so, check the rig settings. There is a DV menu setting in the radio that needs to be set for "auto transmit" with digital data. GPS position