开云体育

Interesting find, Jeff. I tried today, and I'm not seeing the extra colon. I first tried with the 0.3.3 version, and then I switched to the daily build. This is what I have in the

Yep.. That did it.. Thanks a lot!!! Now onto the tests.. --73 de Doug

Dan, Thanks for the kudos. Found something even better. If you look at the repeater.config file, you will see there is an extra colon put in after the COM callout (COM1:0: for example) by the

Find the repeater.config file. devices = [('net:192.168.1.147:20011', ''), ('tnc:COM6:0:', '9600')] Remove the extra colon after the COM6:0: devices = [('net:192.168.1.147:20011', ''),

Dan, thanks for the kudos. I think you'll even be more happy that we have been able to make the tnc work DIRECTLY with the ratflector software without needing the TCP/IP "layer". The configuration

Use port 20011, not port 20003. I posted a longer message explaining why, but haven't seen it come up here, yet. Best Regards, Jeff Scoville AE5ME

Tried to post a message tonight and it didn't "take", so if this is a duplicate, I have to apologize: Dan, thanks for the kudos. I think you'll even be more happy that we have been able to make the

Test message to see if I can post from this computer (please disregard). Best Regards, Jeff Scoville AE5ME

Tried to post a message tonight and it didn't "take", so if this is a duplicate, I have to apologize: Dan, thanks for the kudos. I think you'll even be more happy that we have been able to make

The link did not work for me either. However, looking at the Files section, it was the 11th down from the top. 73, Tom KC9ONY

Dan, Thanks for the kudos. Got some even better news for you, if you'd like to eliminate the TCP/IP "layer" completely on the packet side, but get it to work on the DRATS repeater/reflector

Doug, The port 20003 is for the repeater software to talk to the hotspot. You want to talk to the software "before" it does its work and passes the information on to the hotpot. You want to

Donald, I clicked on your link and was not able to retrieve the file from the yahoo group. Didn't see it in the list, either. Looking forward to reading your work! Best Regards, Jeff

The D-RATS General Training Syllabus used at the recent training in Farmington, NM is available on the D-RATS Yahoo Group in the Files section <D-RATS Training

All, I am trying to connect my D-RATS terminal to my Hotspot (Connected to REF 15C) for testing. I get an error from D-RATS software, stating, "Unable to Connect 10061, connection refused."

All, ? I am trying to connect my D-RATS terminal to my Hotspot (Connected to REF 15C) for testing.? I get an error from D-RATS software, stating, "Unable to Connect 10061, connection refused." ?

Problem solved. The new PC had DRATS set to transmit on the AGWPE modem (bottom left corner of DRATS) instead of the net:127.0.0.1:9000 modem. In order for the TCP encapsulation to happen we had

First packet PC is up and running without a problem. But, the second attempt isn't going so well. We verified that it can communicate with the DRATS client/repeater PC over RF using UZ7HO modem

Got it! Jeff, I read your email about 100 times and finally understood (my fault, not yours)! So, I've got three PCs running. One is the ratflector/client. The second is a DRATS client

Excellent news!!! I can't wait to give this a try, Jeff. Did you see my post of the thread on Wednesday? I'm kind of stuck, and wondered if you could help me clear my mind on this. I'm going to