Re: D-Rats, Packet, and UZ7HO
开云体育Interesting find, Jeff.?? I tried today, and I'm not seeing the extra colon.?? I first tried with the 0.3.3 version, and then I switched to the daily build. ? This is what I have in the repeater.config file... ? [tweaks] allow_gps = ? [settings] gpsport = 9500 acceptnet = True netport = 9000 devices = [('COM1', '9600')] trust_local = True state = True idfreq = 30 id = W4DTO require_auth = False ? Sometimes the repeater app starts up without a problem, and sometimes it won't.?? I think if I click OFF and ON it tends to error.? But, if I start it up and leave it alone it tends to start.??? ? But, I don't get anywhere with it.?? I'm trying to use UZ7HO's Soundmodem with AGW Express and the virtual serial port. ??I have tested the UZ7HO/AGW Express setup with RMS Express, and it's working.?? But, Soundmodem never seems to hear anything from the repeater app.? ? ? From:
d-rats_group@... [mailto:d-rats_group@...] On Behalf
Of ae5me@... ? ? Dan, ? Thanks for the kudos. ?Found something even better. ?If you look at the repeater.config file, you will see there is an extra colon put in after the COM callout (COM1:0: for example) by the D-RATS software configuration screen. ?Remove the extra colon manually and TNCs will interface well with the repeater/ratflector software. ? If you want to use a soundcard, you can use a package like AGWPE Express to forward a "virtual" COM port to the TCP/IP port on the AGWPE or UZ7HO soundcard modem software. ? Hope that helps you even more, because it eliminates the TCP/IP intermediate layer! ? Best Regards, Jeff Scoville
|
Dan Ozment