开云体育

I'm trying to get D-RATS configured for the first time with my ID-880H. Every site that I see about this combination says that I must set the radio value DVT=DVTAT. I have found all the other

Hello, My ststion is 24/7 so you can connect and test any time. I moved to module D as suggested however no one on there, there was 2 other stations on Module C I'll stay on C for now.

Module D (REF015D) is designated for DRATS use. I would tune in but am stuck at work til 1800 eastern time.

I have set up a small test station using a dv dongle I am hooked in to ref 015 C using D-rats Please can I ask if you have any spare time try a ping or leave me a mail .or message. Hope

Hi Dan, I managed to set up ratflector on one PC which is connected to the 44 network (ham radio) and in that rafflector also include the Internet d-rats server. Then from a remote

Very interesting concept, James. I'm not familiar with ampr.org. I will have to check it out. From: d-rats_group@... [mailto:d-rats_group@...] On Behalf Of

Hi Dan, OK so the next stage up from ax25 / packet radio is to put the old TNC in kiss mode and from Linux assign an IP address to the radio interface. In Ham radio we have ampr.org which is a full

I have on several occasion setup a network with many different computers running D-Rats. I typically use KA8JMW, KA8JMW-1... D-Rats users then sees each of these as unique stations. Ed KA8JMW

We're in the same place, then. I have made a tnc work on d-rats, but cannot make it work on a ratflector. I don't understand your question about "44 IP". Dan W4DTO

sorry tnc to d-rats only not the ratflector... The DV dongle is more proof of concept, its the only D-Star item I have access to at this time, so think of it as a radio (to be bought at

I had hoped that it could be an easy fix, but I haven't been able to get anywhere with it. Everyone we have talked to (including the developer) about it has said that there is not much developing

Ok thanks for the reports I will test again too and let you know if i get the same issues. I did report back on the dv-dongle in the repeater and that DID NOT work either. Works fine in the d-rats

I have tried this with both a Kantronics TNC and AGWPE, and I cannot make the AX25 piece work on the ratflector app. ?AX25 seems to work with the DRATS client. ?I think there may be a bug in the

Have you managed to gateway from d-rats---tnc----<radio>----<radio>----tnc---ratfelctor---dstar--->>> This si what i am looking to do and then help build a gateway between the digital and analogue

Hello I am James / 2e1avx / MB6JP I have been playing with d-ats for the last month or so and love the simplicity..so far and what you can achieve with the software. I am now looking to stretch the

John and the group,You have swerved into something I have tried to warn users about. You can have the same callsign on more than one instance of D-RATS, but please don't turn them on at the same time.

Sly, one more thing that puzzled me yesterday morning as I was trying to confirm my settings for you. I had one instance of D-RATS running on my PC connected to the 51 (the radio link). I had

OK thanks John for the reply. After comparing my radio settings to yours looks like I was unaware that the "GPS OUT" setting has to be set to OFF, mine was ON. Everything else was verbatim. I had

By the way, I was using the orange RT Systems cable as well. John WB4QDX Sent: Monday, August 26, 2013 1:08 AM To: d-rats_group@... Subject: [d-rats_group] D-rats not keying

Sly: I tested my 51A with the following settings and it worked with D-RATS. ID-31A/51A 9600 GPS>GPS TX Mode = OFF, GPS>GPS Auto TX = OFF, GPS>GPS Set>GPS Out = OFF, DV Set>DV Data TX = Auto Don't