Re: D-rats not keying ID-51A
|
Sly:
I tested my 51A with the following settings and it worked with D-RATS.
?
|
ID-31A/51A
|
9600
|
GPS>GPS TX Mode = OFF, GPS>GPS Auto TX = OFF, GPS>GPS Set>GPS Out = OFF, DV Set>DV Data TX = Auto
|
?
Don’t forget to set the right COM port.? Use Device Manager to locate it.? Also, make sure only your radio entry is checked in Preferences>Radio.
?
By the way, I have used my 51A for packet and soundcard modes with my KPC-3+? and SignaLink USB with some special cables I made up.
?
Hope this helps.
?
John WB4QDX
?
toggle quoted message
Show quoted text
From: sly [mailto:kapchinskipc@...]
Sent: Monday, August 26, 2013 1:08 AM
To: d-rats_group@...
Subject: [d-rats_group] D-rats not keying ID-51A
?
?
Hey all:
Just getting setup for d-rats. I am using the 51a radio, using the "orange" RT Systems cable. I have the following set correctly in my radio; GPS TX Mode = OFF, GPS Auto TX = OFF, DV Data TX = Auto and baud set to 9600.
I have set up (in d-rats) the 51a radio in the Preferences/Radio tab using Com 3 and baud of 9600.
When I start d-rats it shows connected to the 51a. However I cannot get it to transmit when I ping a callsign (ping station feature) or use ping "all stations" to start a conversation. The 51a is selected in the dropdown selection of radios to use, left of
send line/button.
I realize other station(s) has to be in the "stations" list in order to chat with them first. So where am I going wrong and how do I get other stations propagated into the "stations" section and why will my radio not key up?
Thx n5gqb Sly
|
