开云体育

I tried to sign up, but my callsign was 'already in use', so I tried logging in but it said it wasn't recognising my email address... I'll see if I can figure out what I'm doing wrong, but I don't

There is no limit coded into D-Rats, but the configuration list can get harder to navigate.

John: Thanks for all the effort you have put into this. I and others really appreciate your work. Thanks and 73, Rod ------------------------------- Rodney

Hello All, I have created the "ham-radio-software" GitHub organization and Maurizio has moved the official D-Rats repository to this

Hi Troy: Will post as soon as I can verify connections from outside my home network are possible.? Waiting for some fellow Ham Operator within the AREDN Mesh in Puerto Rico.? But I can advance the

Can you let us know how you have it set up?

Hi Again: Please ignore. Sorry, it's working. Seems good. Stiff have to test outside the home network. 73' Edfel KP4AJ [email protected]> wrote:

Thank you Virginia! 73' Edfel KP4AJ

go to 58B on Tuesday evenings and the "after net" should be able to help you. I have my Raspberry Pi 3B working for d-rats but not setting up the things you need to know. I am guessing you are on

Hi: This setup for a D-Rats repeater working within AREDN mesh.? IP seems to connect under Preferences > Radio BUT If I try a non TLD domain like COA, Distribution without (.com, .org or regular

Hi Again: Bingo!! Well now listening 9000 and was able to connect from another machine (Windows). The proper way to invoke was: python d-rats_repeater.py -C Anyway, will appreciate reference to

Hi: Just want to share I have tried both raspberry pi 3b and raspberry 4b. Also tried various versions of HAMPI. Last one tested 1.1 but netstat -lptn shows no listening. I am sure there must be a

Hi All: New to D-Rats here. I installed a HAMPI 3.01 image into a raspberry PI 4. I have setup the D-rats client into Windows 10 no problem so far. My main interest is to run a Repeater from

For Winlink emails, you need a Winlink account. It's the only way to get a password that you will put in the Message parameters. For regular emails I tried three email servers. Yahoo, Google, and my

You may need to check which outgoing mail service you are using.? Google started flagging email connections from D-Rats as an unsecure email client and won't accept messages unless you went in and

John, I have been working through similar issues, but found this document very useful and now have D-RATS talking back and forth to the CMS of Winlink with no

Having trouble sending email from d-rats to either Winlink or an external gmail address. Mail just sits in my outbox and never leaves. Running d-rats 0.3.9. Any thoughts? John WA4KWK

Jack and all, When you refer to the "server side of Winlink" are you suggesting that RMS Packet or one of the other components could pick up the messages and deal with them appropriately? Our club

Thank you for the list of ratflectors. 73 de KC5SAM, Virginia

Thanks all, I've managed to connect to a couple of the ratflectors, and downloaded the list of D-Star and Rats nets, although some of them are well into the early hours of the morning over