开云体育

hello, I am re-starting with d-rats and especially starting with my IC-705. Can someone explain to me how to connect the 705 to d-rats via the USB port under windows? (10). in advance thank

Thanks for the update

The following files and folders have been uploaded to the Files area of the [email protected] group. * /D-RATS Forms/field_status_report_GA.xml (

Didn't know fast data should be off, I have it on. Thank you. Jim

You might want to check to make sure that the radio is not somehow set to “Fast Data” mode.??This is a feature of the newer D-Star radios.??In order for the radios to be able to communicate

latest status:? Yesterday, I was able to communicate between the ID51a Plus2 to my IC92ad using our dstar repeater.? Then I went back to using a simplex channel and the communication only went one

Just to make the water more muddy, I'm chatting on drats with a couple people over the local dstar repeater and it's WORKING. I've also moved cables around, too many variables. I should probably go

I have an ID51a Plus2 that belongs to a club member. To program the ID51a Plus 2, I am using RT Systems ver 5.00.82 software using orange USB RTS-05 programming cable. To keep the system simple for

what software are you using? We’ve verified text via D-RATS software radio-to-radio on multiple occasions; using a mix of ID-51 and IC-91. D-RATS using forms (ICS), keyboard-to-keyboard,

I forgot to say, it won't receive? chat messages either.? It transmits DV voice and receives ok. I had a problem like this once with my IC92ad when I had the baud rate wrong. Jim k6nra

I"ve been working on a few ID51 radios of various models and am solving one problem at a time. This current ID51a Plus2 when transmitting on DV to another DSTAR radio, the call letters are not heard

Yes, your winlink password must be added into D-Rats.??Go to Preferences and drop down to the Messages tab and you will see the location where you put in your password on a line that is about at the

Glen, thanks for the post. I think that is a part of the issue I am dealing with. I have Drats 0.3.9 currently. under the 64 bit version. with winlink now requiring a password. does that have to be

Hi, l noticed GMail has cutoff unknown/unofficial? app access.? I presume DRats is in that category.? Does anyone have a nice free server they use successfully on DRats?? Thank you. 73 Rory

Heather, Another poster put this in a more recent thread. Try the recommendations and see if that helps you. Begin paste: Use D-RATS version 0.3.9. ?The original 0.3.3 does not work with Winlink

Mark, going to ver 0.3.9 did the trick.? So fast, before I could go to Outbox it was sent!? Granted it was internet but it works. 73 Rory W4RJG

Rory, My county ARES group just did a net and sent traffic to Winlink. We did this using D-RATS version 0.3.9. ?The original 0.3.3 does not work with Winlink due to Winlink now requiring

We have successfully used DRATS software running on laptops connected to IC-91 and ID-51 (using the RTSystems orange cable) radio-to-radio.. It works and the software is excellent. Now I want that

Hi, An older document said I needed to contact someone about my winlink id.? Could I get an explanation what is needed to make winlink work in my drats communications tools?? Thanking you in

the answer is on page 7-15 of the manual, but all I asked for was a simple answer, somebody provided it, 4800 or 9600 baud. thank you - Jim k6nra