开云体育

OK I OBVIOUSLY HAVE NO CLUE AS TO HOW TO MAKE AN RSS FEED WORK IN DRATS. WOULD/COULD SOMEONE PLEASE GIVE A GUY SOME DIRECTION AS TO HOW TO MAKE IT WORK, READER REQUIRED, ADDRESS ISSUES, WHATEVER IT

not confused, thanks.. I wonder if this comment found in an old document is true and the problem? this is a cut and paste forgive the format...... "Also you can only use the “email” form,

Mike The only way I have been able to send NTS message via Winlink is to use OUTPOST. There's a check that enables you to send NTS message as a private message. There are NTS Target station on HF.

As an RO in Maryland, I am looking for a way to send the ICS or other forms via a winlink connection. right now all I get is a hung message in the outbox. regards mike/k3mmb

Hello All, I may be all wet, but I suspect that what is the problem is a Windows 7 setting in the Sounds setting section of the Control Panel. Or possibly, a setting in the sounds section of

We just had a comport issue with a drats install on a win 7 service pack 1.The comport appeared to be installed correctly in both drats and the device manager, every time we opened drats the comport

Mike, This is an excellent find. ?I will give you credit for that. Since I run Linux, it is good to know that they work on Linux. I have an IC-706 and an ID-880 in my truck. ?I have been thinking

Hi David, I'm happy you found it useful. The cables are not shielded, but I've never had an RFI problem using them. A few ferrite snap-on beads might not be a bad idea as prevention, though. I've

Mike, Those cables are awesome. ?I need to get 10 or so... ?Have you had any RFI problems connecting them to the radio? ?They don't look like they are shielded. Thanks David, AC7DS

If you're handy with a soldering iron, these FTDI USB to RS-232 "wire end" cables work well: http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_USB_RS232_CABLES.pdf The cable is a USB

John, I could not get my OPC-478U to do that. ?If you do let me know how you did I that. Thanks David, AC7DS

John thanks for the suggestion. Having a built in converter is the way to go. However I am a little confused. If this cable will work for programming and data transfer... Will my OPC-478U do the same?

John, I am pretty sure that ICOM sells a USB version of the OPC-1529. ?It isn't cheap. I built my cable and just use a USB to serial adapter. ?The cable is easy to build and there are schematics

Yes, we have a Gateway/Internet problem there. Sent: Wednesday, October 08, 2014 3:49 PM To: d-rats_group@... Subject: Re: [d-rats_group] RF D RATS Using ID-880H Mobile John, is the

John, is the Warmsprings DStar site off line ? I tried to link up and ould not let me link. David Bash KI4IKM ki4ikm@... d-rats_group@...> wrote:

Use the RT Systems RTS-05 cable. It works as a programming or data cable. John WB4QDX Sent: Wednesday, October 08, 2014 2:59 PM To: d-rats_group@... Subject: [d-rats_group] RF D RATS

No on usb cable. Yes on serial to usb . David Bash KI4IKM ki4ikm@... d-rats_group@...> wrote:

Now that I have a working D RATS program using the internet, I am wanting to set up a RF connection. Does anyone know of a USB version of the OPC-1529 data cable? If not, what serial to usb converter

Bonjour, Oui j'avais vu c'est ce qui a provoqué ma recherche car il faut etre memebre du groupe. C'est fait depuis ce matin...Je vais pouvoir chercher ca... Amitiés, F5ANP Op :

Hi, May I ask if anyone here has been successful connecting D-RATS Repeater to a ircDDBGateway port? I try to connect it to 127.0.0.1:20011. This port is connected to DCS010R. I can see the traffic