Pat, what would be the setting on a 31A?? DV Data TX?? Mine is set to auto.?
?
I am having problems using a repeater to send low-speed data.? If?w use simplex (N5BGC and N4VIP) then we have 100% success with the Test Connectivity.? However, if we go to a repeater (W5SF), then 0%.? N5BGC has a signal analyzer and can see the signals going into the repeater but R2D2 coming out?
On Mon, Apr 8, 2013 at 5:20 PM, n3tsz
<n3tsz@...> wrote:
?
My IC-91AD lets me select one of five TX messages, or none/off. I guess the 2820 is the same. The TX message uses the same data frames as low speed data, so sending a TX message from your radio and transferring data from the serial port uses more data frames per transmission and therefore takes longer. With a transfer rate of 900 bps, every little bit helps.
--- In
d-rats_group@..., "spikels6" wrote:
>
> On the File " Using_D-RATS_with_your_D-STAR_radio.pdf ", what is meant by the "Turn off the TX message on your DSTAR radio as it uses bandwidth that could be used to transmit DRATS
> data."
>
> Do I select a line with nothing in it, or is there an on/off switch somewhere in the IC-2820's Menu? I am trying to send email via the radio RF.
>
> Spike
>
--
73 de N4VIP (SFARES EC, SANTA FE AND SAN MIGUEL COUNTIES DEC), Don
