Hi Dan, On POP Mail check to see if your ISP requires security and that you have the correct port. Ports 25 and 110 do not require security. Port 995 requires SSL to be enabled. Also check to see which additional ports you can try for POP mail. it may turn out another Port might be better. It's easy to forget which need TLS or SSL. If your ISP requires a password for POP, you won't get it unless you get SMTP to send the PW first and then after SMTP, it can send POP Mail. These may be linked this way for your ISP. HTH, Ed
toggle quoted message
Show quoted text
--- In d-rats_group@..., "dtozment" <dan@...> wrote:
(Note to self: When posting to a group and expecting an answer turn off digest mode!)
Thanks for the replies, gentlemen.
John, that is the way I understand it. I believe Ed is on to something here. I changed the rules as (I think) Ed suggested, and I can now send mail outbound! However, inbound is no longer working. Now that I suspect that this is an Email Access rule issue I'm going to play around to see if I can find a combination that works for both inbound and outbound. For now I've got the following on the rats PC
CallSign = W4DTO
Access = Both
Email Filter = {blank}
CallSign = W4DTO-1 (this is the callsign I have on the rats PC)
Access =
Email Filter = {blank}
