开云体育

So, I want to be able to have a user type in their email address on the touchpanel and then send that serial data to a PC. I'm not sure the best way to go about doing that. Anyone got any ideas?

Found something in the processor?s error-log: úà192.168.1.148 7?úàsocket ok?err sys 1. Error: SimplPlus[App01] # 2021-01-07 20:26:37 # Exception:AddServerToList: -

$7000?

Hi, i?m currently programming my first CP4 and i?m having an issue getting WOL to work. I?m using a selfmade SIMPL+ module for this since years now without issues. Problem is, on the CP4, it

i don't think it matters whether dll or pkg i get the driver is loaded correctly not working on MC3, working on RMC4 - by working, i mean i don't get the splus error maybe another bug... tried loading

I have two CP2Es in my system with one being a master and the other being a slave. I just upgraded my cable modem and a side effect is that my home router went from the 192.168.1 IP range to 10.0.0.

I’m on the road today but will take a look at it tomorrow or over the weekend Thanks Jay

Single zone will work but would require just adding 4 of them. Trying to keep my rack clean.

Sammy changed the port from 1515 to 1516 on 2020 models.

I just copied the pkg file to the processor and updated my program to point to that instead of the dll and it still works fine. But still, given that it isn't working for Mark, there's no downside to

All of the documentation and samples I saw indicated the DriverFile signal should point to the dll file and that is actually working using version 1.13 of the Crestron Certified Drivers Display

Dear All, I didn't check all the topic replies. CCD use in Simpl Windows is detailed here <https://support.crestron.com/app/answers/detail/a_id/1000527/kw/ccd> in the Crestron True. Hope this helps.

I think you *used* to have to use the .dll, but the SIMPL wrappers do support the .pkg file now (which is just a zip of the .dll and other config files)

But isn't the Modulus a single zone device? It sounded like Brad is looking for a single device with at least 4 zones (so 4 independent HDMI outputs) - sort of 4 AppleTVs in 1 box. I don't believe

Great idea Brad... the only thing that I've seen so far is the Modulus M1 https://www.modulusmediasystems.com/ Jury is out as to whether it will make a real go of it, and if it will be able to flush

The following files have been uploaded to the Files area of the [email protected] group. * /Documents/Integration with LiftMaster MyQ Garage Door Opener.pdf (

I just posted a document in the files section from research I did recently on the MyQ product. I haven't actually integrated a unit yet so YMMV, but it looks quite promising. Of course I would

sorry, i can't agree that you point at the dll (this may have been an older method) i just tried Randy's hint - i used v1.9 and just loaded the path in the driver, i did not mention the pkg file

I have an AppleTV, Firestick and Roku. Basically all three do basically the same thing, streaming of Netflix, Hulu, Disney+, AppleTV+. Is there a server appliance or equivalent that can house all my

We've had an absolute nightmare with LG resi OLEDs over the past month or so..? LG confirmed a bug in some of the firmware on certain displays, the display wanted a different baud rate on the 232