开云体育

No issues so far on my home PRO3 and my test PRO3

Brian - "Time & Forehead Savior"Thank you very much ??Trey

it fixed a Sonos connection issue I had with the 3.1.0 modules in an RMC-3

Glad I've already retired!

This is one example of why I have the utmost respect for members of this group. Taking the time to document this issue and share it with the rest of us is very cool of you Brian! Ryan Cunningham

"TB couldn't explain why" ...er, 'cause they didn't test it?... Seriously though, thanks for the update, Brian!!

So glad I'm close to retirement age...

This is just a heads up to everyone. I just got off of a 2 hour session with TB regarding secure user connections to the processor. Here's the rundown: * CP4 processor running the latest firmware *

Of those who have updgraded their 3-series procs to v 1.8000.0014, Have you seen any issues???

So, as an addition to the coax method, you can use DirecTV DECA3 adapters – one on each end – and get 10/100 way beyond 100 meters even over rg-59.? I think you can actually get about 1000 feet

I'll keep an eye on this over the next couple of weeks. This is my home system and I get emails whenever the system re-starts so I should know for sure in the next 3-4 days if turning off the cloud bs

Thanks chaps. FW: 1.601.3935.28796 No ports forwarded to the internet Lincoln. I'll turn off all the cloud crap. I see 1.8000.0014 is now up so I'll try that as well. From the Release notes: Updates:

And do you have any ports forwarded to it from the internet (or if it’s in a place like a University… do ACLs allow traffic from any potentially hostile ranges, e.g. students)? -- Lincoln

What FW version? Do you have CloudClient turned off (and the Hydrogen stuff off also, depending on FW)?

Isn't it a so old school for such an advanced tool? I remember it was running perfectly on 3-Series, I don't understand why we are not able to get the same standard feature!!

Anyone know what these errors mean? They started appearing a couple of months ago on my lighting DIN-AP3. This has been running for a couple of years with no significant changes made to programming in

Hi, thanks for all the responses. I?ve opened a ticket with TB, ticket numer <https://support.crestron.com/app/account/questions/detail/i_id/2809669> #210614-000106 To those who also have the same

So it's been a while since I've had to create a module with string parameters on a predefined list, but sure enough - this one came up and bit me on the ass tonight!? Thanks everyone for chiming

Use a serial buffer. The analog buffer (assuming those are the “buffers” you’re using) will pass input to output on the rising edge of enable if they are not the same; the serial buffer does

I'm glad it's not just me. I have seen IR just stop working on a CP4 until a reboot. In fact 2 out of 3 jobs where we replaced a 3 series with a 4 series we've ended up putting the 3 series back in to