¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Color Picker #smartgraphics


 

¿ªÔÆÌåÓý

Use a serial buffer. The analog buffer (assuming those are the ¡°buffers¡± you¡¯re using) will pass input to output on the rising edge of enable if they are not the same; the serial buffer does nothing on the rising edge but passes values as they change while enable is high.

?

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Diamond)
ControlWorks Consulting, LLC
Direct: (+1)440.771.4807 | Cleveland: (+1)440.449.1100? | Boston: (+1)508.695.0188 | DC: (+1)202.381.9070? | Fax: (+1)440.449.1106
Crestron Services Provider | Biamp Authorized Independent Programmers | Extron Qualified Independent Programmer

?

From: [email protected] [mailto:[email protected]] On Behalf Of Gloomy Goose
Sent: Sunday, June 13, 2021 6:20 PM
To: [email protected]
Subject: [crestron] Color Picker #smartgraphics

?

Hello team, question about Color Picker widget.

I have many RGB light zones, I created subpage reference where put Color Chip widget to represent current RGB setup. Idea is to be able to press on Color Chip and open big pop-up with Color Picker widget.

Analog signals from Color Picker then sent via buffer to a controlled device.

Problem is that Color Picker will send RGB values to another devise from its last position. Feeding RGB feedback to Color Picker will actually update visual representation, but not the analog output values.

I don't want to create multiple pages with Color Picker, that's what buffers are for.
Not sure how to approach it. Any ideas?

Thanks.

Join [email protected] to automatically receive all group messages.