开云体育

You don't need to go that far, you can return an object that encapsulates the array directly and have a single callback. -- Crestron Service Provider - TBD Enterprises Inc.

Thanks for the reply, Slip. my problem is Toolbox shuts down when I rebuild user database. Unfortunately the user database is not “rebuilt” thus the new ir device is not seen in my User DB. My

I’ve been playing with Domotz. It seems like it can give me status of all connected devices which is good, but I don’t think it can give me the current state of each. For instance, it tells me

An extreme long shot I know...I need one of these. I have a CP4R (new, in box) that can be part of some sort of trade. Anyone?

I've added some example SIMPL programs to the files section too. /g/crestron/files/WakeOnLAN%20Examples%20-%20UDP%20and%20Crestron%20Certified%20Drivers.zip Please refer to OLH 4403 -

This is real easy in a SIMPL windows file.

Domotz is pretty dialed. In terms of IP monitoring, I would say Domotz is perfect. some of the devices, if Domotz has specific interface (usually SNMP) will offer even more info. Also, if you have

Make sure Toolbox paths are set up correctly to you're db's You should really save the ir file to your project folder to avoid your user db's becoming bloated. A bloated user db will slow down simpl

Hey! Using Toolbox, Device Leaner to capture IR…no troubles. However, when I rebuild ir database Toolbox shuts down. And ir database has not been rebuilt. I don’t use Deal for ir as it has trouble

It fell off my radar to reply to this - I have uploaded my module to the files section, under the Modules folder. /g/crestron/files/Modules/AppliedElectronics.Crestron.Tricaster.clz

If you're using Eric's extension (ie https://marketplace.visualstudio.com/items?itemName=sentry07.crestron-splus ), the keyboard shortcut to compile is Ctrl+Shift+B. You'll need to navigate to the

do you think i could do this all in Domotz? seems like that might be easier to set up.

Thanks Lincoln, I did see another post as well talking about broadcast addresses on the processor subnet. I just had to deal with this using some of the USB-EXT-DM lan units. My subnet uses the

The following files and folders have been uploaded to the Files area of the [email protected] group. * /IPID Checker-Creator.zip ( /g/crestron/files/IPID%20Checker-Creator.zip )

If you need to add IR or RS232 ports to a RaspPi custom system, you could look into using Global Cache expanders.? They make Ethernet to IR and Ethernet to Serial bridge devices.? Would probably be

Hi All, I've got a truly humongous S+ module I'm writing to control an RGB Spectrum go28 video wall (Ugh) While most of my S+ module run 50-200 lines, this sucker is almost 950 lines. I really need an

I just dropped a WoL module I developed for LG displays. See if that works for you.

No, that's perfectly fine. All the panels will act in sync with each other *except* if you have page flips defined in the panel project (as distinct from driven by program joins). Because they are

Hi All, I've got a client that is using multiple (same exact) xPanels that connect on the same IP ID, this shouldn't be an issue, right? Thanks

I agree you can do many? things on a Raspberry Pi that Crestron can do and in some cases better.? In particular, an HTML5 interface is much easier and cheaper implement than the Crestron solution