开云体育

I feel like I should and or do know this yet can't get this right. I'm looking to detect an empty string from a MMS-2 via a SIO. Double quotes doesn't work, neither does \x00. In particular, I am

Did they tell you it was unsupported but you could start from scratch creating a new project in the newest d3 version and it would be fine. That's what I was told by tb.

I am hesistant to say what they told me. so I will just answer your question. I did not receive a file. I rolled back my database. From: Crestron@... [mailto:Crestron@...] On

The squeezebox, plus the controlworks module works faily well. You will need either a dedicated PC, or a ReadyNAS as the squeezecenter talking to the crestron, and the ReadyNAS in turn connects with

apologies in advance as I'm very new to this. I'm trying to control a Pioneer Elite SC-05 through an MPC-M10 using the SC-05/SC-07 module from Crestron's website. The problem is that when I power the

The panels can sit on either charger, but the wall worts need to match the imc. The imc will say on it which voltage it is.

We are looking into CCS and ihiji, but I have to admit I've been to busy to do a physical test with either one. -J

The project folder is wherever the .SMW is saved. If you want to get rid of them go to wherever the SMW is and delete the .UMCs/etc that duplicate those in your usrmacro If you use the usrmacro folder

If the new router has anything different about it's IP scheme, meaning the gateway address, dhcp range, ssid, encryption, etc, then you need to enter these into the tpmc 10 setup screen. Press buttons

Dependent on which codes you are using. If using "multi display codes" check ID=ALL REPLY settings in OSD menu. Default set to OFF. "When controlling the monitor externally, select if the

TB sent me a file called Event Scheduler Update v3.0.exe that was supposed to fix the error but doesn't seem to. I have a call back into them, but was this the file they sent you?

Bravo.

http://xkcd.com/54/

Lol. +1. - Chip

Yes, Being able to monitor ALL devices - IP, CresNET, etc. is very important to us...

Joshua, Great Website!! Just a suggestion - You need to have Dave B. change his name to Joshua Chris K.........:)

I found AVS Audio Converter worked,, but always on the lookout for something free and better for in the name of science. Thanks David

I don't know if this is unique to N9, but you can monitor crestnet traffic with those as well (you just point some stuff in simpl at the server). Plus, it has logmein on it. We have one in our

I was messing with that last week. It also has to be in mono for 6L's. I grabbed a decent sounding doorbell, opened it in audacity, saved as 8bit mono and it sounded like a dying tractor at a rock

Audacity will convert just about anything to 8 bit WAVs. <davidrichardson1163@...> wrote: -- Jeremy Weatherford