Dependent on which codes you are using. If using "multi display codes" check ID=ALL REPLY settings in OSD menu. Default set to OFF.
"When controlling the monitor externally, select if the communication command, which specifies
destination equipment ID (ALL or GROUP ID), is replying or not. When you need reply, please
select "ON".
If you connect the multiple monitors that are daisy-chained from second monitor by RS-232C,
you need to select "OFF" from second monitor"
-Stig
toggle quoted message
Show quoted text
--- In Crestron@..., Neil Dorin <neildorin@...> wrote:
Download PD Comms Tool from the NEC website. It will help you to get all the commands you need.
-Neil Dorin
Sent from my iPhone
On 2012-04-02, at 12:56 AM, "daniel.lingman" <daniel@...> wrote:
Hi guys!
Anyone made a module for this series from NEC?
The ones i have tried dosent work with this screen.
I get the main functions to work (on/off, inputs) but i cant get the screen to report powerstatus after the screen turns off.
It starts from standby, so its not a power-save issue.
Maybe someone here is a NEC expert? ;)
All info is needed. If someone has a Serial I/O with commands, that will help as well!
Reguards
Daniel
