开云体育

On Jun 7, 2013, at 7:44 AM, "Neil Dorin" <neildorin@...> wrote:

I've been lucky not to have to deal with too many DMPS's so far.

Is there a way to display the IP address of the unit on the front panel
from the OOTBF program?

I'm wondering if the techs get the rack installed and networked today if
they'll be able to tell me the IP or if I'll have to go "toolbox console
hunting" on a /23 network...


[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--- In Crestron@..., "Block-O-Matic" <michael@...> wrote:

Just FYI. Andrew Culver was nice enough to post a SIMPL# module on github to show this working. I spent a few hours testing his module, expanding it and writing a help file. No knowledge of SIMPL# is required to make this work, so no fear! The module is small and easy to use.

Go to and follow the directions. You'll be pushing notifications to any app at in no time.

Let me know if you have any questions!

Michael Block

On Jun 7, 2013, at 9:48 AM, PatM Gmail <pat.molettieri@...> wrote:

Now that would definitely put a damper on it if I need to tell the client it
is $99 per each iOS device.

Pat M

From: Heath Volmer <hvolmer@...>
Reply-To: <Crestron@...>
Date: Friday, June 7, 2013 9:44 AM
To: <Crestron@...>
Subject: Re: [Crestron] New iOS App?

I assume that since it's an in-app purchase, it's now $99 per unit.

On Jun 7, 2013, at 6:31 AM, Nick Mitchell <nick@...
<mailto:nick%40sound-fx.net> > wrote:

Oh ok. I didn't even see the upgrade feature. I guess that will keep people
from sharing the paid version.

Sent from my eMail.

On Jun 7, 2013, at 8:20 AM, "Jesus @ Audio& Net Artist" <
audioandnetartist@... <mailto:audioandnetartist%40gmail.com> > wrote:



Just downloaded as "free" but when you go to Updrade it will charge you the
$99.99. maybe is like the traditional way free with limited and paid for
expanded. I cannot even run the Demo for some reason... And now requires
IPID anc CIP.

--
*Jesus Tossas*
*
*
*Technology Architect, Audio Engineer, Programmer*
*
*
*787-329-3944*
*
*
Contact Info <>

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]



------------------------------------

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the

Database area.

Yahoo! Groups Links

[Non-text portions of this message have been removed]

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Heath Volmer
Sent: Friday, June 07, 2013 9:44 AM
To: Crestron@...
Subject: Re: [Crestron] New iOS App?

I assume that since it's an in-app purchase, it's now $99 per unit.


On Jun 7, 2013, at 6:31 AM, Nick Mitchell <nick@...> wrote:

Oh ok. I didn't even see the upgrade feature. I guess that will keep people
from sharing the paid version.

Sent from my eMail.

On Jun 7, 2013, at 8:20 AM, "Jesus @ Audio& Net Artist" <
audioandnetartist@...> wrote:



Just downloaded as "free" but when you go to Updrade it will charge you the
$99.99. maybe is like the traditional way free with limited and paid for
expanded. I cannot even run the Demo for some reason... And now requires
IPID anc CIP.

--
*Jesus Tossas*
*
*
*Technology Architect, Audio Engineer, Programmer*
*
*
*787-329-3944*
*
*
Contact Info <>

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

On Jun 7, 2013, at 6:31 AM, Nick Mitchell <nick@...> wrote:

Oh ok. I didn't even see the upgrade feature. I guess that will keep people
from sharing the paid version.

Sent from my eMail.

On Jun 7, 2013, at 8:20 AM, "Jesus @ Audio& Net Artist" <
audioandnetartist@...> wrote:



Just downloaded as "free" but when you go to Updrade it will charge you the
$99.99. maybe is like the traditional way free with limited and paid for
expanded. I cannot even run the Demo for some reason... And now requires
IPID anc CIP.

--
*Jesus Tossas*
*
*
*Technology Architect, Audio Engineer, Programmer*
*
*
*787-329-3944*
*
*
Contact Info <>

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

On Jun 7, 2013, at 1:29 AM, "Trey Chamrad - Hometunes" <trey@...> wrote:

the RMC-200 is really not enough power for soundbars.



did DM8X8 house with them in 6 locations with Artision soundbars.let down
for overall volume.



my 2 cents on that part.



From: Crestron@... [mailto:Crestron@...] On Behalf
Of wookertee
Sent: Thursday, June 06, 2013 5:59 PM
To: Crestron@...
Subject: [Crestron] Re: OT: RG59 as speaker wire??





The amp is an AAE.
Originally this location was a TV, using DM for distribution.
Two CAT5 and a Penta (5x mini-RG59) were pulled to the location.
Now the client wants "better" sound and has requested a sound bar.
I was thinking of using a RMC-200 with the amp, but that seems a tough
upsell with 6 TVs in the same situation...

Argh, take-over jobs, the bane of my existence.

--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , Trey
Chamrad <trey@...> wrote:

+1 have also done for zone audio, low wattage, under 100' to 150'

Thanks,
Trey

please excuse typos, courtesy of my Samsung Galaxy S4
On Jun 6, 2013 12:50 PM, "wookertee" <wookert@...> wrote:

**


Has anyone used RG59 as speaker wire?
I remember that MIT used to have a F-connect screw on adapter to speaker
level.

:p don't smirk, it's a take-over job (roll eyes...)

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--- In Crestron@..., Jeremy Weatherford <jweather@...> wrote:

If Samsung labels the EX-Link port "For Service Only" instead of "For
Service and Control" then you're pretty much stuck in my experience. It
might work, it might not. We have a TV right now that will turn on but not
off via EX-Link, and yes, the port is labeled "For Service Only".


On Thu, Jun 6, 2013 at 9:16 AM, eagrubbs <eagrubbs@...> wrote:

I am at training for that other company and I have an install going on, so
I can't see the real issue. Supposedly the code works and the control
works, but there is window that is popping up on the tv screen that states
"not available" when the ex-link is plugged in. Samsung support(lol) told
the tech that the model could not be controlled by ex-link. Have any of you
guys experienced this and can the on-screen pop up be disabled?



------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

--
Jeremy Weatherford


[Non-text portions of this message have been removed]

On 2013-06-07, at 3:36 AM, "watpaul01" <p.vladi@...> wrote:

Dear group,

our customer ordered 13 TPMC-3x remotes, but is demanding that we make them white.

Our rep told us that whilst Crestron themselves do not do this, there was a company that custom-modded the remote, but he cannot find the details.

Did anyone come across this mystical Crestron modder? ;-)

We have about 30 TSW-750s in white, 50 C2NI-CB keypads in white, 13 TPMC-3x wall chargers in white... and the remotes are black.

Most obliged,

Paul

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of watpaul01
Sent: Friday, June 07, 2013 5:36 AM
To: Crestron@...
Subject: [Crestron] White TPMC-3x? customer DEMANDS one...

Dear group,

our customer ordered 13 TPMC-3x remotes, but is demanding that we make them white.

Our rep told us that whilst Crestron themselves do not do this, there was a company that custom-modded the remote, but he cannot find the details.

Did anyone come across this mystical Crestron modder? ;-)

We have about 30 TSW-750s in white, 50 C2NI-CB keypads in white, 13 TPMC-3x wall chargers in white... and the remotes are black.

Most obliged,

Paul



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

On Thu, Jun 6, 2013 at 9:16 AM, eagrubbs <eagrubbs@...> wrote:

I am at training for that other company and I have an install going on, so
I can't see the real issue. Supposedly the code works and the control
works, but there is window that is popping up on the tv screen that states
"not available" when the ex-link is plugged in. Samsung support(lol) told
the tech that the model could not be controlled by ex-link. Have any of you
guys experienced this and can the on-screen pop up be disabled?



------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

On Jun 7, 2013, at 8:20 AM, "Jesus @ Audio& Net Artist" <
audioandnetartist@...> wrote:



Just downloaded as "free" but when you go to Updrade it will charge you the
$99.99. maybe is like the traditional way free with limited and paid for
expanded. I cannot even run the Demo for some reason... And now requires
IPID anc CIP.

--
*Jesus Tossas*
*
*
*Technology Architect, Audio Engineer, Programmer*
*
*
*787-329-3944*
*
*
Contact Info <>






[Non-text portions of this message have been removed]