开云体育

My latest article, "My Update on Shelly New Products and Services” is being published by the good folks at Residential Tech Today Magazine on their web site. Shelly, the manufacturer of small IoT

With the KNX-Gate Software you create something like a filter table on the CGEIB-IP. Only these addresses will be handled by the device. But make sure to only use existing addresses. Funny things

Does anyone know if we do add extra boxes do we need to somehow filter the traffic in ETS or will the boxes be able to handle all the group addresses by how the Simpl code talks to the boxes?

bump

I have an old module I wrote about 15 years ago, that allows a D3Pro lighting system to emulate a Centralite Elegance or Jetstream lighting system. Back then, most "lesser" automation systems,

Have a legacy project where the square grills have gone missing for these Crestron EOL'ed in-ceiling speakers. Crestron says the square grills that used to ship with the speakers are no longer

I cannot tell you how much I appreciate the help, the instructions are clear enough! I will take all of this and get this started.

This is not *Necessarily* difficult, but it is a bit clunky... Feel free to reach out to me directly if you'd like to chat about it... It will be easiest to have a separate SimplWindows program

Alright, I have a D3 program made for loads, scenes and what not. Goal is to go RS-232 from our RTI to the PAC2 RS-232. Spoke to tech support on a solution as I am not versed in Crestron at all yet

Reach out to MA support, they have new firmware for this

Hi Thomas, *** In your post, you call out the " PDX-215c " model vs the RLNK-215... The PDX does not even have an ethernet port on it so I'm hoping that you miss-typed... Assuming that you're

Hi Thomas, I'm late for a meeting right now, but will chime in later. I've integrated with the 915R models very successfully over the last few years, and have good contacts inside MAP. Standby...

By the way, we still have one new CGEIB-IP in stock for a possible replacement for old objects. If necessary, we can sell it.

Hi! We use Weinzierl BAOS774 (1000 KNX data points) for Crestron-KNX Integrations. You can write a module for this gateway yourself or use our commercial module.

Mr. Thomas, Sorry to learn of your trials and tribulations. I have no personal experience with Middle Atlantic's IP controlled power products and therefore cannot offer And meaningful observations or

Hi, I have a https://www.legrandav.com/products/power/compact_power/nexsys_compact_power_multi-stage_surge_protection/pdx-215c to control power. I am using

Thanks for the advice. It was much easier than I thought it would be. I do tend to overcomplicate things, so it's nice to know there's a simple solution out there

Muxlab 500086 has worked well for me on a number of projects. Does Toslink also and can convert between them. Power on either end.

That seems to work.? Thanks so much!

I believe this will work for you https://1drv.ms/u/s!AjlldUMTB6AFgoN0AnGIP_HtPf8I4g?e=epHVm5 Thanks Jay