开云体育

Hi Ady Agung! Glad to see it worked for you, I tried the same here but the problem still persists. 1) deleted the register in https://echoadminportal.crestronfusion.com/#/status 2) hard reset the

same way you did on your CP4. Type enablefeature.

You shouldn't ever need to hit restart. Since the module loses connection every few months, I now hit restart every morning

Hi daniel Today I experienced the control processor is not connected to the voice control registration web (https://voicereg-g-na.crestron.io/#/) Then I initialize the processor and delete the linked

Tony what settings are you using with that encoder for your Xpanels? Are you using the video window or dynamic graphics? I may have to go the encoder route if it works good for Xpanels- dont want to

Hey Eric, How exactly did you do that? If you mean logging into https://echoadminportal.crestronfusion.com/#/ and hitting the Delete button, I tried that a lot. Is there any other procedure besides

So Dave for us resi people especially we should just be using ENABLEFEATURE HYDROGENMANAGER OFF as opposed to HYDROGENENABLE OFF? Never heard of the first one but whenever I have issues i'm told by

We don't have any audio switcher in front of these boxes.? Usually people Airplay to them. By the way, is there a need to hit restart on each player or is one enough?

I just got that encoder. Using the second stream set for MJPEG at 720p, the panels at my house display video in less than a second. I didn't have to change anything on the TSW-1060 or TSW-752, those

Thanks for the update.? Good news on how nice the picture was after things sorted out. Your curved screen would have required as low a profile mount as possible.? However, I personally don't mind a

Though I agree that you can definitely get this to work, Why not just switch your audio Switcher to an unused input or something like that, until the condition resolves...

Well as far as Ex-link goes, in my limited application, the S95C works perfectly with it.? The Sammy I replaced was a previous flag ship curved screen.? I can't remember the model number but even at

I had an issue the other day with this. In my case I had just uploaded when everything stopped working. I didn't realize everything wasn't working as Alexa still showed everything except my family

You could always use the Ethernet Information device extender. It allows you to get/set the ip information. If you do go this route, make sure you look at the help on the retrigger. If you want to

I have gotten Sonos to work across subnets with Crestron on one subnet and Sonos on another subnet.? However you need a router that can support an mdns repeater and igmp-proxy functions.? I know it

Thanks Tony. I am going to grab one

I just remotely looked at a couple of sites using that device, and the X-Panel displayed video in less than two seconds. I seem to remember when I was last on-site, the Crestron panels had similar or

Curious to hear how you like the picture, etc. on your new Samsung. Thanks Jay

I am controlling a Sonos Sound Bar with the same Crestron logic you described and it works fine. I would also guess your issue is a network one.

I've never seen a Sonos device let alone tried to control one, but from the error log "Multicast" and "Broadcast" device discovery strongly suggest that the module is expecting to find Sonos on the