开云体育

Hello, Thought I would post this here as well as TB I have a DM-NVX D200 and E30 that I am setting up. I plug them both into a network switch at my desk to configure them and update firmware. I have

I thought all shades were clear connect and would work across all current processors

If you mess up the network config badly enough that doesn't work - for example putting 0.0.0.0 as the subnet mask. :) wrote:

While I haven't tried it, is there an reason why you couldn't ssh into the DM-NVX-360 and get to the text console that way?? I found most Crestron products except for newer version of the CP4R will

Hello, Is this possible? Thank you Bryan

Unfortunately, Caseta Shades can't be moved to the RA3 system. The radios are incompatible, and new shades to work with RA3 ?would need to be made.

I do this at home and the only gotcha is that if you have No Source Selected in the video portion and you have your DVI source selected as audio, you will not hear any audio. You have to have a source

Hi, take a look at Audac TPS40. Regards, Michael

Hi all, I have an old Mirage MMS-5 I don't know why, but now the web interface ask me for for a login/password. But I never put login and password. Anybody has an idea ? Thanks

You need to select all files & subfolders pulled from /display/ and ZIP them to a single file. Though I prefer 7zip, I use Windows built-in " Right Click > Send To > Comressed (zipped) folder " option

Any recs for a tuner - just needs to do AM/FM.? Small profile would be a bonus. Replacing old Crestron tuner.

Can you connect with netcat and issue them

I have a Digital Projection HIGHlite Laser WUXGA that I am having trouble controlling. I have downloaded the Crestron module from their website, as well as referenced the protocol guide. I am

Yes, it should work. You have to enable "free run" on the DVI card.

Trying to get audio source to a location that has a surround receiver fed by DM.? Customer wants to listen to an audio source while sometimes watch video source.? Wonder if I were to add a couple of

Cant you just connect to the panel running the project and use File Manager to pull all the UI files on the panel and then just zip them up and change to VTZ? Used to do that on old panels but havent

Unfortunately all I have is a VTX, not a VTZ... I seemed to remember that there was a way to convert, but that might only have been with construct...

A vtz file is just a zip file. You should be able to rename a vtz to zip and see how it is organized and replicate it with the files you have.

Couldn't you just ask True Blue? :-)

I'm assuming not, but I seem to remember something about this last year... I have a take-over project with TSW-1060s but no VTP source code. I have all the 'Display' files from the Toolbox/File