Hello,
Thought I would post this here as well as TB
I have a DM-NVX D200 and E30 that I am setting up. I plug them both into a network switch at my desk to configure them and update firmware. I have my laptop connected to the same switch. When I run DM NVX tool ( or device discovery) I can only see the E30 listed as devices that are plugged in.
If I connect my laptop directly to the D200 it shows in the DM NVX tool (and device discovery), I can connect to it and upload firmware.
Question is why can't I see both the D200 and E30 in the DM NVX tool when all three devices (D200, E30 and laptop) are connected to the same switch.
Thanks
