开云体育

We use this, it comes with 2wire to BNC adapters so you can use the YZ pair in the cresnet cable.

I'm getting a handle on this.? Reusing old screens still involves a lot of adjustment via smart graphics and I don't think a ton of time will be saved going that route.? Might as well start from

Anyone else noticing more of these errors after using the new app/updating to 1.8001 in the error log? I don't recall seeing them before: 28. Error: LogicEngine.exe [App 1] # 2024-04-20 14:13:58? #

I think I got it. Upgraded toolbox to the latest version and it's OK now. It was not that old and it was working from the day of the installation two years ago. The firmware in the PRO3 is the same

Gary, We have used this a few times, and worked perfectly. Tycon Systems TP-DCDC-1248 https://www.msdist.co.uk/products/tycon-systems-tp-dcdc-1248 KR, David

I heard back from SwitchBot on the question as to whether the Hub 2 would work without Internet.? The answer from SwitchBot is that currently the Hub2 only works through the cloud but that SwitchBot

Hey Gary, There are a number of vendors that make 2-conductor-to-Ethernet/Poe adapters that would solve your issue allowing you to use the Cresnet for POE wired network... I haven't needed this

Its bigger, but I really like the Lightware MX2-8x4-HDMI20-CA if you could use some spare outs MX2-8x4-HDMI20-CA | 4K HDMI Matrix Switcher (lightware.com) ( https://lightware.com/mx2-8x4-hdmi20-ca )

I have a ton of Atlona post-covid and have not seen this issue in the past year and a half. They were the available product when supply chains were nightmares, and I ended up sticking with them for a

I have a project with a bunch of old CT1000 panels that the client would like to upgrade to TSW1070s, I know these panels have Wi-Fi so getting network to them should be no problem, but is there a way

Hello. in a museum we have a PRO3 and a PC with an XPanel. The PC also is used as a remote access for troubleshooting. The service call mentionned that the XPanel was showing "disconnected, trying to

My two cents is avoid Atlona unless you like replacing dead devices whenever the power blips. EX70 Receivers and 210 transmitter plates love bricking themselves when the power goes out

If they have to scan a card anyway, have you thought about a card swipe ? ?I have one that you swipe and it outputs serial directly. ?No external RFID readers or arduinos needed. ?Embed code in the

I got bored of waiting so cycled the power and it appears to have updated!

I've had this thing sitting in my office for years, only used it a couple of times. Decided I'd stick it on Ebay and get rid of it once and for all. Gave it a clean and decided to upgrade the FW from

I second the recommendation for HID Multiclass. Enterprise quality unit and will read most anything. As you noted, needs an Arduino to convert signaling to RS232. For anyone interested I can recommend

If you can try out the HDAnywhere MHUB2.0 4x4. Price wise it's better and it comes with 4 HDBT receivers. There is also a HDMI CEC driver for Displays as well.

Best HDMI Matrix Switcher for 4X4: Still AVPro Edge? (vs. Atlona, Binary, Crestron, etc.) For upcoming Crestron controlled entertainment space.

tested ...on english its working thank you now i need to figure out why?on utf16 its dont ,that before the reverse metod the utf worked but reversed . thanks for the advise ,it work nice! the problem

You could try something like this: DIGITAL_INPUT Test_Reverse; BUFFER_INPUT Key_Input$[1024]; String_Output Out$; Push Test_Reverse { String working$[1024], building$[1024]; If(Len(Key_Input$)) {