开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Re: Need a simple 1080P or 4K video player with IP or serial control.

 

Thanks!
I guess the stream itself can be used within NVX?? Or do I have to use one of the hdmi inputs on the 351?


Re: Need a simple 1080P or 4K video player with IP or serial control.

 

Brightsign would be an option. ?You can trigger playback from crestron several ways including UDP or a relay.

Thanks!
--Kyle Goyer


Re: Web-based local temperature

 

Thanks, Hope (and all!).
I forgot about the Crestron weather module. Thought it was deprecated...


Re: CTI-P301

 

Thanks guys ?


Re: Problem opening files after recovering them SIMPL

 

Thanks all for your replies. I’ve exhausted all the ideas and have just faced the fact I’ve lost all those files. Back to the drawn board sadly.

enjoy your weekend?


Need a simple 1080P or 4K video player with IP or serial control.

 

Need to put an intro video into a NVX matrix for signage etc...
?Any thoughts or suggestions?

Thanks!
Greg


Re: Matrix Analog vs DM Tool

 

That makes sense.?

Just to be clear, you are saying use an ABUF and SBUF with same signals on input/output (left side/right side) and I can get the benefits of both symbols? I have never thought of doing this.

Thanks!

AV_Programmer


Re: Lutron QS

 

Is this a Lutron QSX? That new processor? That unit has telnet disabled and won’t work with a new module that is yet to be written. Login in to the Lutron IP from a web browser and see what the unit is on the info page


Re: CTI-P301

 

For sure go for it.?


I took it and then due to some life circumstances couldn’t finish my cert exam. So 9 months later or so I decided to take the class again to get a refresh before I attempted the exam again.?


Thanks!
—碍测濒别


Re: CTI-P301

 

Check these out in the meantime, plenty of files here to reverse engineer too.

?

--

?

Jeffrey Franck, CTS, DMC-E-4K

Audio/Visual Engineer

Chief Emergency Building Coordinator

Campus Media Services | WSU-TV

Media Resources Center | Room 178C

?


Re: need MTX-3

 

Sorry everyone.? Your responses were going to my Junk Inbox.? I'll contact you off-forum and fix the junk problem.


Re: CTI-P301

 
Edited

Thanks Joshua ?


Re: CTI-P301

 


You got this just do it. At the highest level it’ll give you exposure to some new concepts and ideas. Hell you might just excel, and have some new tools for the tools box.?


Good luck?

J?


On Fri, Apr 10, 2020 at 7:22 AM TJP <Ssute01@...> wrote:
Interesting.. thanks Michael.
I always thought it was a pass/fail thing, and as such, I was worried I may not pass (due to my limited Simpl+ experience)
As this isn’t the case though, I now feel more inclined to just give it a go, hopefully I can keep
up and pick up some new skills?

--


--
Joshua B Zimmerman

The beginning of knowledge is the discovery of something we do not understand.
? - Frank Herbert

This message, including any attachments, may include privileged, confidential and/or inside information. Any distribution or use of this communication by anyone other than the intended recipient(s?? The information contained in this e-mail and any attached documents may be privileged, confidential and protected from disclosure. If you are not the intended recipient you may not read, copy, distribute or use this information. If you have received this communication in error, please notify the sender immediately by replying to this message and then delete it from your system.? ? This email may contain confidential and privileged material for the sole use of the intended recipient. Any review or distribution by others is strictly prohibited.? If you are not the intended recipient please contact the sender and delete all copies.


Re: CTI-P301

 

Interesting.. thanks Michael.
I always thought it was a pass/fail thing, and as such, I was worried I may not pass (due to my limited Simpl+ experience)
As this isn’t the case though, I now feel more inclined to just give it a go, hopefully I can keep
up and pick up some new skills?


Re: CTI-P301

Michael Larsen
 

开云体育

301 isn't something you have to pass. It's a prerequisite for the final Certification Exam, but, as such, it hasn't got an exam.?

I too attended 301 twice. I didn't have time to complete the Certification Exam after the first time and I felt that my Simpl+ was too rusty to pass, so I attended again. There was now additional cost involved.

/Michael

Fra: [email protected] <[email protected]> p? vegne af TJP via groups.io <Ssute01@...>
Sendt: 10. april 2020 14:01
Til: [email protected] <[email protected]>
Emne: Re: [crestron] CTI-P301
?

Thanks for the response Chris.
out of curiosity, what happens if you don’t pass the course? Do I sit it again at my own expense??

I wasn’t aware ppl sat the courses more than once?


Re: CTI-P301

 

Thanks for the response Chris.
out of curiosity, what happens if you don’t pass the course? Do I sit it again at my own expense??

I wasn’t aware ppl sat the courses more than once?


Re: CTI-P301

 

开云体育

I have taken 301 twice now. I think you should go through it. It will help your Simpl+ a lot, at least in my opinion. Though with online, not sure how the classes will be,but i enjoyed learning and gaining extra knowledge to help me. I know people who went through 201/301 2 or 3 times to get better.

Chris



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: TJP <Ssute01@...>
Date: 4/10/20 6:39 AM (GMT-05:00)
Subject: [crestron] CTI-P301

Hey guys,
I recently passed my P301 entrance exam and have automatically been confirmed for the course (online) in about 2 and a half weeks time.?
My concern is, I’m really not sure if I’m ready for it.
My Simpl+ knowledge is pretty poor.

I’m in 2 minds whether I should cancel and do it at a later date (once I’ve had more Simpl+ experience/practice) or go through with it and hopefully I can keep up.
What do you think I should do?
Any advice would be appreciated?
Thanks


CTI-P301

 

Hey guys,
I recently passed my P301 entrance exam and have automatically been confirmed for the course (online) in about 2 and a half weeks time.?
My concern is, I’m really not sure if I’m ready for it.
My Simpl+ knowledge is pretty poor.

I’m in 2 minds whether I should cancel and do it at a later date (once I’ve had more Simpl+ experience/practice) or go through with it and hopefully I can keep up.
What do you think I should do?
Any advice would be appreciated?
Thanks


Re: Web-based local temperature

 

开云体育

If you are DYIer: Arduino Yun with DHT11 temp & hum sensor. Super cheap en very reliable.?

On 9 Apr 2020, at 23:24, ckangis <chris@...> wrote:

Hi All,
Anyone know of a *simple* way to harvest the Local area outdoor temperature from the web, into SMW to then put it on TSWs and TStats?? I'm looking for an alternative to the CHV-RSS because of cost, and what a pain it is to install them generally for this purpose...
TIA!!

(I'd get it from Crestron's SmartGraphics weather app, but they havent updated it for basic features...I only started asking for that 9 years ago...they could update it, I'm sure...:(? ?)


Re: Lutron QS

 

I know this seems too simple to actually be the cause, but in the Lutron module's I've opened up, they use "login:" (all lower-case) to trigger sending the password. If you're actually receiving "LOGIN:" (all caps) it won't work. However, the module could easily be modified to fix that.

Which exact version of the Lutron module are you using?

--- On Thursday, April 9, 2020 at 11:13 PM, AVMaster wrote:

Ok...so let me attempt to be more specific cause this is really weird.

Everything seems to be connecting just fine, if you view the TX$ and RX$ to and
from the TCP client in debugger you can see the module connect and the Lutron
processor responds with ‘LOGIN:’...it would be at that point I would expect the
TX$ from the module to respond with the username entered in the core module but
nothing happens...it just times out and responds with something like ‘failed to
receive expected response’ or something along those lines. I’ve done this a
dozen times before but obviously something is wrong...

The real bummer about all this nonsense is that I only need to control just a
few loads in a theater and a golf simulator, not even doing any extensive
integration.