开云体育

You do have the correct app installed on your device? There is Go App and Go App For Tablets. I have seen in the past people have installed the wrong version on their device and it causing

CP4 Firmware is up to date, its a new install. Go App is latest iOS version as I deleted the app and re-installed.

Yes all enabled for local LAN, and mobile data

I've never actually done this, so take it as you will, but you are supposed to be able to style the scheduling panels using CSS : Programming Guide: Crestron Room Scheduling Panels (

Good day Has anybody faced such SIMPL+ bug. 1. You make a module 2. Press compile 3. No errors, the symbol was updated .. .. but actually it was not updated ... SIMPL uses the old version of the

On your iPhone, have you tried going to settings, privacy & security, local network, then make sure that Crestron app is enabled?

What firmware are you guys on? I know there's a minimum firmware to use Go on Android. Not sure about iOS. Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent:

I have had the same problem for a while and I have never figured out what I am doing wrong. I am having the problem with Android and I am at the same point as you, no connection and the IP never comes

So, we've got a bunch of TSS-770 scheduling panels pulling their schedules from 25Live through Fusion.? That's working just fine.? The challenge is the folks in one building are upset that the room

Doesn't connect at low level. Tried loading the project locally? - no change.

Yes to all of the above, except my user is in the Connect Group. I have just setup another user in the USERS group, no change.

Agreed with what Dean said to check. Also, when you try to connect with the GO app, does the IP-ID connect but just the project doesn't get loaded or does it not even connect at the low level?...

In Simpl, do you have the Crestron Go project name defined to match the name of the project loaded on the processor?? In the Go app are you using port 443 for http port, 41796 for CIP and the ip

CP4 Processor. I have programmed logic in simpl using both the Crestron Go symbol (ID03) and Crestron App symbol (ID04). GUI programmed as Crestron App in VTProe and uploaded to the processor. User

Please don't mention Sonos and Crestron in the same sentence. So many angry emails from clients and sleepless nights ugghhh.

Hmm. By chance are the keypads and the bond module in different program slots? Thanks Jay

Direct from lutron kp didn't work, buf to rename signals and manually trigger in debugger, still didn't work, tried playing with pulse times on an mos but that still didn't work. Maybe every 3 or 4

Yes, I traded emails with Michael the other day. They are actively working on getting YT Music, but I suspect it'll be 6-12 months+... Yet again, the digital age moves at a snail's pace when you need

@ckangis My house is a YT Music house and I have had a few clients that ask specifically for this. Most of my clients use Spotify or SXM- at least those are the things they alwasy ask us to setup.

Separately you'd asked how I "improve their reliability". I will speak to this primarily in principles and not in terms of any specific brand of device, and will make reference to the