开云体育

Hi I responded to the private email you sent. Thanks Jay

If you just want the basic smart graphics media player functions, this is quite easy to do. You just add the Sonos System module and Sonos Device Module. Connect the device module to your media

Now you know that the value is coming in as a decimal value. My guess is the first 2 bytes after the header are for the lamp hours. With what I know and that is \x1E\x00\x59\x00\x00 the projector

If the string has a delimiter add a gather to the socket Rx.

Does anyone have a complete Sonos program and 1070 panel file that I can purchase. Thank You SG

Oh, It's defiantly as TS-1070. Brand new, only been using it about 5 days and had been working fine until this morning.

Just checking with others... I'm told that this new TSR firmware is only addressing HOME issues and there's no benefit to it with custom systems. The release notes do not make note of this, nor does

You sure it is TS-1070 and not TSS or anything else? Otherwise maybe new firmware disabled this command. You can also try typing LCD and then hit the TAB key for auto complete in case it was renamed

Thanks, If only: TS-1070>LCDORIENTATION Not available on this product TS-1070>

LCDORIENTATION consosle command

I've just attempted to load a landscape ch5z project onto a 1070 and for some goddam reason when it restarted it's in portrait mode. I can't see anything in settings to reset this and there is no

Thanks chaps. I'm attempting to test this but having all sorts of hardware related problems right now

You need to enter the mic? serial into the module parameter field. The easiest way to get? the mic ID is to set debug to '1' every time you press a mic button the? module will return the mic

You might consider Wall-Smart, if you can make it work the result is really good looking and the panel doesn't stick out off the wall like it normally would. If there is a back-box you might need to

I have a VC4-PC3 where files were deleted from NVRAM with a power outage.? Has anyone seen this? -- Matt Grisafe

Note that that join/contract signal needs to be held high via logic, otherwise you'll only see the keyboard for the duration of the button press.? Set a join/contact to the Lost Focus output of the

With this specific model (DM-NVX-360) there is a line for it in simpl that says "reboot" When this signal is driven high, the decoder will be told to reboot on the rising edge of that input. My signal

We are powering all of them locally with brand new 24V x 1.5 amp power supplies. They only call for 1.25 amp so we are giving them a little bit extra to work with. -- Stephen H Programmer /

That is possible although I am skeptical because we have 8 of the same exact monitors with the same exact display settings and it is only 1 decoder that is acting up. I also swapped the HDMI inouts

This sounds like it might be the solution I need. Are you able to share that file or point me in the direction where to find it?