开云体育

You need to enter the mic? serial into the module parameter field. The easiest way to get? the mic ID is to set debug to '1' every time you press a mic button the? module will return the mic

You might consider Wall-Smart, if you can make it work the result is really good looking and the panel doesn't stick out off the wall like it normally would. If there is a back-box you might need to

I have a VC4-PC3 where files were deleted from NVRAM with a power outage.? Has anyone seen this? -- Matt Grisafe

Note that that join/contract signal needs to be held high via logic, otherwise you'll only see the keyboard for the duration of the button press.? Set a join/contact to the Lost Focus output of the

With this specific model (DM-NVX-360) there is a line for it in simpl that says "reboot" When this signal is driven high, the decoder will be told to reboot on the rising edge of that input. My signal

We are powering all of them locally with brand new 24V x 1.5 amp power supplies. They only call for 1.25 amp so we are giving them a little bit extra to work with. -- Stephen H Programmer /

That is possible although I am skeptical because we have 8 of the same exact monitors with the same exact display settings and it is only 1 decoder that is acting up. I also swapped the HDMI inouts

This sounds like it might be the solution I need. Are you able to share that file or point me in the direction where to find it?

What would the keyboard do if there's no input field? Assuming you do have an input field, enable its Launch Keyboard checkbox, assign its Set Focus On Digital Join to something, and add a button

I'm also curious as to how you are powering these units (POE or with a power supply). Generally when we start to see weird things like this (especially with the DM line), 99% of the time it was an

I am curious as to how you implemented the work around by rebooting the NVX with a touch panel. I have a similar issue with a DM-NVX-D30 that sometimes needs a reboot to recover. Abe C Programmer /

Random thought - could it be the monitor that is freezing and the loss and then restoration of the signal from the NVX "fixes" the issue???

Just in case anyone is reading this and has the same issue as me... I didn't find a "smoking gun" for the exact problem with this but I will say that after a reboot I spent a few hours trying to break

Smart locks offer a range of benefits that make them a great addition to any home. These locks provide keyless entry? and allow you to control access to your home remotely. You can create unique

Anyone know how to bring up the TST-1080 inbuilt keyboard from a button? I've no issues poping it up from a text input field, but client needs a button to call it. I thought there would be a reserved

I just replaced one of these yesterday. Make sure that the 1070 is running the correct firmware for Zoom currently tsw-xx70_2.006.0054.001, also when you set the IP-ID on the webpage for the 1070, if

Swapping out a TSW-1060 with a 1070 today and somehow the processor in my 3 series DMPS3-4K-350C won't recognize the 1070. Same code from 1060 and set IPID to the same. Panel looks fine with 1060 pgm

The following items have been added to the Files area of the [email protected] group. * /Ross Ultrix 32 - Probel8.usp ( /g/crestron/files/Ross%20Ultrix%2032%20-%20Probel8.usp

I'm not sure what they settled on. 5mm would be solid. 3mm might be too flexible depending on how much of the wood it overlaps and how gorilla-fisted your users

I have tested this module, but unfortunately, it does not work with the Televic D-Cerno CUR system