开云体育

I'm pretty sure the GE protocol is completely different than the Vista-BPT, but thanks for the ideas. I'm scheduled to go back to the site next week, and will hopefully be able to duplicate the

Hi Stefan, I?m switching different lens memories for different content types: SDR, HDR and 3D. I?m using the detected content types coming from a madVR Envy videoprocessor and then trigger the

NX-8E!! Within this last year, I did a deep dive on the serial protocol interaction between the NX-8E and the host, and am 100% sure I discovered the causation and the fix for the intermittent disarm

I've been using a similar but older NX-8e panel in my house for years with the same intermittent disarm issue. I did a bunch of digging and testing but never found a cause or solution but plenty of

Without knowing the formatting of what you are parsing and exactly how it gets distributed it is difficult to comment with any certainty. Depending on what your dispatcher is doing, you may be able to

That?s how I?ve implemented it now. Instead of having multiple module parsing the input stream for relevant data, the whole stream now only gets parsed once in a “dispatcher”-module. Then the

They had gateway with IOs many years ago. We use it with Crestron. I don't remember name of the unit. But take a look at Schuco Bacnet gateway. Bacnet protocol is directly supported by Crestron.

Hi Thorsten, would you like to be able to select different picture modes on a certain Videosignal, or do you setup picture settings for these different signals? Not absolutely sure about the newer JVC

Hi Marc, thanks a lot. I?ll have a test with the client setup soon. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von Marc Gesendet: Mittwoch, 8. Januar 2025 13:01 An:

can you send me the documentation ? put in here https://drive.google.com/drive/folders/18G_mNwdzinVociN6UW2w468TD82tjgJh?usp=drive_link or send to ady.putra@... thanks in advance

Hi I have control protocol documents for VX600 and VX400 controler.

I did power on, power off and power query via IP on a viewsonic 98” as a favor for a customer a while back.? Don’t have the exact model number handy but you would think it would be the same. Port

I did power on, power off and power query via IP on a viewsonic 98” as a favor for a customer a while back. Don’t have the exact model number handy but you would think it would be the same. Port

*Last two times I touched ViewSonic control via IP I was unable to control them, switched to RS232 and was able to control via commands from the manual.*

Has anyone had any luck controlling this display over IP?? If so, any chance you would have a module?? All we are looking to do is power on, power off and volume controls. I called Viewsonic and we

I have not completed the formal ZUM training. I am a CSP and have had a client reach out for (what sounds like) basic support in replacing some keypads which have broke. I am going to parse through

Thorsten, We've done a revision to our driver's documentation and we believe we support the functionality you were referring to with regards to selecting different display modes. Here's a link if

Hi all, I'm would wondering if any could advise how Crestron able to integrate with Schuco door and windows. I found Schuco system need the automation manager with integrate with KNX but couldn't find

CES (Consumer Electronics Show) is a major annual trade show organized by the Consumer Technology Association (CTA) in Las Vegas.? This year there are over 4300 exhibitors and over 130,000 people are

I might go with an option C, which is a bit of the two combined. You have a parsing/sorting module (call it the sorting hat) that looks at incoming data and then sorts it based on subsystems, with