Hi Stefan,
?
I?m switching different lens memories for different content types: SDR, HDR and 3D.
I?m using the detected content types coming from a madVR Envy videoprocessor and then trigger the corresponding commands via the JVC control API.
That already works by using my own module I?ve written, I?d just like to move over to a commercially available module, because I don?t want to spend more time on writing my own modules.
?
Marc, if you?re reading this: I?m issuing the Lens Memory commands to select memory slots 1,2 and 3, using these commands:
\x21\x89\x01\x49\x4E\x4D\x4C\x30\x0A
\x21\x89\x01\x49\x4E\x4D\x4C\x31\x0A
\x21\x89\x01\x49\x4E\x4D\x4C\x32\x0A
?
Can you have a look if you have these commands available in your module?
?
If that?s a yes, then I can skip the testing and purchase the module right away.
?
Thanks,
Thorsten
?
?
?
would you like to be able to select different picture modes on a certain Videosignal, or do you setup
picture settings for these different signals??
Not absolutely sure about the newer JVC models, but for my RS2000 I could save picture settings for?
different signals SDR, HDR, HLG and I believe 3D. So if the projector recognizes these kind of signals?
it will change the picture settings automatically. So maybe no need for manually changing the?
picture modes.?
But of course if you setup different picturemodes for a kind of signal that wouldn't be enough.?
About the display modes, I am pretty sure you can't save picture settings within the presets. These
are only installation setup settings like zoom, lensshift etc.?
But this seems to be selected by the DisplayMode commands within the driver.?
I checked the manual of my RS2000 and there is a autoselection of the HDR10 and HLG picture mode
that you can setup for an certain saved picture mode. But I am afraid maybe not for 3D.?
