开云体育

Didn't want to high jack the other the Roku problems thread.? I have the latest database but not seeing anything.? Have found a couple that rolled their own.

Under "Project Format", select "Archived File" (vs) "Folder". The "Load Project As" radio buttons will no longer be greyed out.

I can confirm Steve's reporting of issue number one as I have clients calling. :-(? Some more detail: -This seems to have been enabled between Roku v14.0 and v14.1, My testing was done on an Ultra

Pretty sure Crestron processors only allow for time zone adjustment, as far as I’m aware there’s no DST offset in the web interface. I have a site that relies heavily on schedules so I’m keen to

NTP servers provide UTC. Clients need to apply their timezone and daylight-saving offset. That's a general statement - haven't looked into how Crestron handle it, but the NTP side of things should

Side question… do NTP servers adjust for daylight savings? Tim Greenbank Control Systems Engineer

It was a 2 series processor that I ended up just upgrading to a 4 series to use the internal NTP.

Are you on an older 2-series processor? All of the newer ones (3 and 4 series) don't need a module for NTP, you set the time zone/NTP in the Processor itself. I generally use a local one or googles

I was using the Crestron module "Network Time Sync v1.0" with the default servers and getting errors in text console with debugging enabled.

The first two of those should be working; also time.windows.com has been an option in the past. NTP is on Port 123 and is not in any way like HTTP so if you're literally using

Thanks for the follow-up.

Hello Group, To close this topic?: Phantom keypad could be under control if they are “linked to the QSE-CI-NWK-E interface”, this is not by default and needs to be done by the Lutron programmer.

Definitely don't use automatic assignment. Organize your joins in logical groups and start each group at a nice round number with some space for expansion. Don't be afraid to leave stretches of unused

Anyone have a working NTP server? I've used "us.pool.ntp.org", "time.nist.gov" and "http://worldtimeapi.org/api/timezone/EST" and each are timing out, no response, or too many request.

Hi All, One of my pet-peeves of the digital age (yes, there are many!) is how I see buttons on digital devices, like my iPhone, register presses indicated visually by inactive-active-inactive FB but

These options are available on my RMC3

I'm trying to upload an html5 web XPanel to a new RMC4 on latest FW. The 'Load Project As' radio buttons are greyed out and it's default is CH5 mobile. Why is CH5 XPanel not selectable?

I haven't ever controlled a Gain Timed block, and I don't think there's a ready-made module in the v1.4 (or any other version for that matter) that you can use; what I *do* know is you can definitely

Hello All, Have a very quick turn around project controlling a BSS Blu-100 for the first time in a while. I have all the DSP programmed, but wondering how to control the fade buttons in a Gain Timed

Thanks Eric.? Unfortunately the Ethernet switch I am using does not allow me to block Multicast traffic on specific ports.? Putting the two Roku's pulling Multicast streams from the NAX on a