开云体育

Side question… do NTP servers adjust for daylight savings? Tim Greenbank Control Systems Engineer

It was a 2 series processor that I ended up just upgrading to a 4 series to use the internal NTP.

Are you on an older 2-series processor? All of the newer ones (3 and 4 series) don't need a module for NTP, you set the time zone/NTP in the Processor itself. I generally use a local one or googles

I was using the Crestron module "Network Time Sync v1.0" with the default servers and getting errors in text console with debugging enabled.

The first two of those should be working; also time.windows.com has been an option in the past. NTP is on Port 123 and is not in any way like HTTP so if you're literally using

Thanks for the follow-up.

Hello Group, To close this topic?: Phantom keypad could be under control if they are “linked to the QSE-CI-NWK-E interface”, this is not by default and needs to be done by the Lutron programmer.

Definitely don't use automatic assignment. Organize your joins in logical groups and start each group at a nice round number with some space for expansion. Don't be afraid to leave stretches of unused

Anyone have a working NTP server? I've used "us.pool.ntp.org", "time.nist.gov" and "http://worldtimeapi.org/api/timezone/EST" and each are timing out, no response, or too many request.

Hi All, One of my pet-peeves of the digital age (yes, there are many!) is how I see buttons on digital devices, like my iPhone, register presses indicated visually by inactive-active-inactive FB but

These options are available on my RMC3

I'm trying to upload an html5 web XPanel to a new RMC4 on latest FW. The 'Load Project As' radio buttons are greyed out and it's default is CH5 mobile. Why is CH5 XPanel not selectable?

I haven't ever controlled a Gain Timed block, and I don't think there's a ready-made module in the v1.4 (or any other version for that matter) that you can use; what I *do* know is you can definitely

Hello All, Have a very quick turn around project controlling a BSS Blu-100 for the first time in a while. I have all the DSP programmed, but wondering how to control the fade buttons in a Gain Timed

Thanks Eric.? Unfortunately the Ethernet switch I am using does not allow me to block Multicast traffic on specific ports.? Putting the two Roku's pulling Multicast streams from the NAX on a

Thanks Lindsay. To follow up on this, I had to reflash the eDidio DMX controller with their native firmware, as the unit I had was flavored for Control4, which left TCP port 23 disabled, as well as

Disregard. Had an authentication issue, even though the IP table showed connected I still had to follow the Secure Deployment steps. Feedback from dry contacts now working.

Do the inputs on this device require some sort of voltage? I can't seem to get a dry contact to register in SIMPL when physically shorting a wire across any input and the ground. Maybe I assumed these

I currently have 3 VM's running on 2 different computers, all running AlmaLinux. One with version 8.10, another with 9.4 and the last one with 9.5. I'm seeing weird Token problem on all three VC4

I haven't run VC-4 on virtual box for quite some time, but I have on KVM daily.? I have never seen this issue.? I would be highly surprised that it has to do with VB, it is more likely your vc4