开云体育

Just to check. Are you sure it is not a 1000 mistyped into 10000?

The reserved joins start at 16000. To drive 10000 high would require a custom module that can send CIP, as the standard TP symbols don't go that high.

What is odd is that the controls were visible before an unrelated processor code change, and now not visible. But just to confirm, there are no reserved join 10000, right?

Absolutely.? Super simple.

Simpl program.? So not home.? So I could enable a VLAN2 and apply to lets say 4 ports on the switch and then enable a crestron profile to those ports?

I've been using the Netgear AV line for quite a while, and the answer for us mostly depends on if it's CH or Simpl. With most of the Simpl projects, I connect NAX port 1 to the "Client" VLAN and NAX

Been a long time since I had to do chase scenes.? The project we did it on used Color Kinetics and we interfaced to their controller.? With the system that we worked on the power supplies were ID

I do this all the time to hide buttons versus deleting them. I use 10000 for the reason it doesn't exist anywhere and have never had an issue.

If everything is powered as you expect.? Try pressing the OVERRIDE button next to the Cresnet connector.? This will engage the amp and all its channels regardless of programming.? Done a few that

So I have to replace an Araknis 210 switch, which has been our go to switch for NAX.? Apparently there are issues when using the Araknis 210 switch for NAX audio, I just haven't experienced it till

The following files and folders have been uploaded to the Files area of the [email protected] group. * /LG TV IP Testing R2_compiled.zip (

I always change the PKG to a ZIP file and then load the DLL file to the processor.? I haven't had any issues with multiple modules connecting to the same file.? I did change the timing of the logic

Cresnet powers the logic portion of the amp, so, some amp circuitry, the rest of cresent reporting etc. If you are watching in debugger, and disconnect AC, or, turn the switch off, the device will

I'm looking at a VTPro project that has controls that have a visibility join of 10000. In Simpl, the module isn't set to go that high, only to like, 1062 or something like that. Is there a reserved

Silly question. . . I have a quite remote site with no output, any zone, on one of their amps but it appears to be operating normally according to debugger signals. ?I did read something from a while

I second this ... I've had no problem with an Amazon Fire TV CEC CCD loading for 16 devices when they are staggered. With earlier versions of the CCDs, I used to unzip the package file myself and just

Its a much more useful concept for more cookie-cutter systems that are the same except for the model numbers of some devices changing. I do this if needed, but still tend to skip the CCD and use

Since this is a job-offer in Germany for someone speaking german, I will write this in German Gesucht werden Crestron Programmierer im Raum Hamburg. Wir suchen erfahrene Programmierer, motivierte

I am just avoiding using the CCD concept until I absolutely have to. I personally dont see the benefit on resi systems I do. I mean how often does a client change the TV they are using? Even if I had

I'm surprised nobody mentioned that BSS doesn't offer live preset editing, meaning presets can only be edited offline. For me that is one of the biggest downsides of BSS, everything else I can work