开云体育

Ended up switching to EX-Link. Didn't find any codes that worked.

What I've seen is that some threads do not get killed or stopped in a timely manner. Where stopprog command doesn't receive "Program 1 Stopped". Then it restarts the program, then eventually stops the

After installing Construct, creating a 1 Page, 2 Button project, compiled and uploaded to TSW-1060 or TS-1070, all I get is black background and spinner. I unzipped the CH5Z and CH5, put all the files

I was just talking about this a week or so ago. What I am seeing is, during the load toolbox isn't waiting for the program to stop, it says stopping program then immediately starts sending the new

/g/crestron/topic/anyone_noticing/102019002

Have been seeing this since the 4 series came out. They still havent fixed it. Lots of discussion on it on the FB group. I have a case open with support but of course it has not gotten any useful

Hi, yes you have the possibility to use mDNS Repeater for usage across VLANs but we try to avoid this as much as we can, because this can be tricky or depending on devices sometimes gives you

Yes. Have seen the exact same behavior. I don't know the cause though. I usually do an INITIALIZE at that point. Not really sure if that is helping, but it doesn't seem to happen for a while

Unless you are using Crestron Home, the TSR-310s do not need to be on the same subnet/vlan as the Crestron processor.? The TSR310 doesn't do airplay or streaming. Off topic, you can play airplay to

Alternatively, look at the AprilAire S86WUMPR Tstats. I'm just getting ready to deploy these on a site because the HVAC guy wanted something he was familiar with for service. ControlWorks has a module

Kind of a side note, but I'm running a separate AV Vlan in a residence, how do you manage audio streaming and airplay? Don't those endpoints needs to be in both VLANS?

Looks like I will be buying a new HZ-THSTAT for my new home. Thanks for the input. Cheers

Hi, really interesting discussion… I want to add my experience, especially because I had one two days ago. In all systems there is a Crestron own SSID with 2.4 GHz which leads into the Crestron

Hi All, I have noticed this behavior over the last 4-6 months. The condition seems to happen only once every 4-10 program loads with CP4 (typically the only 4-series I use)... - Load updated program

I'm actually looking to eliminate it as I no longer use MyCrestron... And CloudClient is disabled. I'm looking to turn it all off. Its not a big deal, but like CloudClient I don't want anything

I have had cases where MyCrestron Registration failed.?? I don't remember all the details but the fix was use a different Domain name.? Also, don't forget to reboot the processor as I don't think

Text console mycrestron domainname password

Don't know about CRPC issues because I don't use it on the TSR310.? But I wouldn't think it would be an issue as that would probably mean Crestron Go CRPC would not work too if you are on a different

I've been buried with other more important issues and haven't had any time to sort this out.? The monitor I'm using for this test is a actual 1080P computer monitor with no internal speakers.? I do

Hi All, So I have a project that we just updated last month with an existing CP3 (probably 7+ years old). I'm noticing this in the error logs every few days, and I'm thinking that this is an old