开云体育

If your system is just for watching TV and streaming video then personally I don’t see value in a 2-way remote. However, if your system includes an audio source for listening to music and that audio

If you're trying to make HTTP requests, it's a little more complicated. See https://crestrontutorials.blogspot.com/2006/06/requesting-content-from-web-page.html Appending strings is not

I might be building my own Crestron DSC driver pretty soon out of need, similar to my Interlogix NX-8E interface (which I’ve improved significantly since I last talked about it) the bulk of the low

Thanks Eric and Jay so far greatly appreciated, Great points you both bring up about the range of MLX's remotes compared to ML 600's and 418 Gateway.? I just assumed the newer tech would be even

Crestron suggests only 20 devices or 1000' per cable or cresnet segment. This has nothing to do with power and everything to do with communication. The more current the processor the more I have

Agreed!!!

FTR, power supplies and Cresnet Hubs are not the same thing. The PSs are of course to provide sufficient power for various devices (Four 75w PSs seem to be ALOT for a lighting system, unless this is

Don't be so quick to throw away the ML-600 remotes.? I think they are the most bullet-proof remotes that Crestron ever offered.? I still use one in my own house because it simply works 100% of the

Crestron had a lot of issues with that remote, the resolution was to use a single remote per gateway. The ml600 communicated over 418mhz. The MLX-2 is using 2.4ghz. 2.4ghz has no where close to the

Biamp cornerstone support has documentation on how to create a connection with a Crestron processor and how to send commands. I recommend searching “crestron” on their support site.

I found a few more files and created / uploaded another IR file (Somfy Stewart screen). Stewart used to post their HEX files, but that appears to have stopped.

Thank you for posting. I found those codes and those are the Sindy IR codes I mentioned trying that didn’t work. Why doesn’t Stewart share the complete hex codes for their screen. Bummer

Thanks Eric for clarifying this, however could you please elaborate on why Crestron said you should use a separate gateway for each remote?Does that mean I need to purchase 3 gateways since I will

Also, keep in mind that when you are using the CEN-RFGW-EX gateway with a MLX-2 it can not be used with any other device. You will use the CEN-RFGW-EX(MLX-2) version of the definition in the program.

You have to use the CEN-RFGW-EX with MLX-2, none of the other gateways will work with that remote. The CEN-RFGW-EX was originally just for EX devices. Crestron figured out they could update it with

Hi there, I have recently started ?replacing and upgrading my old ?PVID/Pro2 system with Ml 600's to an DMPS3 4K-350 C-Series processor. ?While doing this upgrade I decided to go away from 3

Hi there my temporary fix is still working as I await the arrival of my Crestron RMC3., I was able to get a used one in Canada for quite a bit less than a used Pac2 Mini. ?I will keep Pac2 M and try

Mmmmm....That tells me alot!!

Thanks for the feedback, Gregory. How long ago was it integrated, and has it been reliable?

I have the DSC NEO successfully working on a job.? Was a pain to setup.? ?Just make sure all settings on alarm system are correct, check documentation for module.? It takes like 10 minutes to