开云体育

Are you referring to the hostname?? If so, yes.? Just remember to generate a new Self-Signed Certificate after an IP address or hostname change as outlined in the VC4 manual. -- Doug G

So agree with u...? "As the saying goes.. just because you can, doesn't mean you should!" It has no sense giving the option to a client to change a DM-NVX-363 from receiver to transmitter. Just

Hi guys, Working on a D3PRO project changing from a PAC2 to a CP4.? I was was looking at the SIMPL code that D3PRO generates and discovered there are some interesting console commands you can issue

Is it possible to change the server name of a VC4? Thanks! -JRW

We've had numerous AV Consultants specify NVX devices to be switchable from encode to decode and fortunately on every occasion bar one, we have convinced them it's a bad idea. As the saying goes..

Thank you Dustin for pointing out that Reserved Join for Enter Setup. Works great and I just used it today!

I eagerly tried?v2.8003.00055 (Mar 18 2024), still did not fix the issue :((

Any chance you could post some example strings from Crestron? I'm having fun trying to make sense of the protocol manual.... Just need to switch between presets 1,2,3 SOunds like a need to send a

Has anyone successfully controlled one of these with Crestron?

Awesome, I'll give them a try, thanks a lot!

Hi, we?re using these: https://mikka.com/en/products/touchscreen-monitor They are located in Austria. If I read your domain correctly, you?re located in the Netherlands, so that should work for you.

Yeah, i really think they?re not designed to be switched permanently between encoder and decoder mode. I?m wondering what the use-case is for this scenario. Cheers, Thorsten Von: [email protected]

Pretty sure you had to reboot them to set that change in effect- at least on the older ones.

Hi guys, Did anyone of you use the?Planar PT3270Q in combination with a DGE-100? If not, any recommendation for a fairly modern touch panel that definitely works in combination with a DGE-100? Thanks

Hi Sean, not sure if it applies to the 4P-B86EJ2U: we just received a Sharp display that allows selection of the RS232 protocol: "S" or "N" protocol. The commands described above are "S" protocol, the

I'm having this exact issue but with a 4P-B50EJ2U. Did you ever figure it out?

I believe there is a setting in the menu that needs to be changed for this display: Home → Settings → Remotes & Accessories → RS232C control to Via serial port Hope this helps.

Does anyone have a module for a Sony FW-55BZ30J display?? I tried the two in the app market and haven't had much success, unless there is something in the menus that I need to set first. As always,

Can take over a minute to change over. Michael Restrepo | Owner Restrepo Innovations 825 Windham Court North Wyckoff, NJ 07481 Office | 201.925.0059 Direct | 201.952.4624 Email |

Hi all have to program a NVX-363 to work as an encoder or decoder, the user will select. Never did this before, saw an analog input called "DeviceMode" for this task, but I'm sure there is more behid