开云体育

I have take all the XiO Cloud courses but have never gone through a formal deployment. I am not clear on the best practice of deploying via XiO Cloud in the following two conditions. 1. *Client does

Sweet , Thank you Jonathan

I know this is an old thread. I found it when googling for the same issue. YES, you can issue a console command to stop the debugger data stream DBGSIGNAL RESET ALL

I to am dipping my toes into Construct this week. I was sent a test TST-1080 for evaluation and wanted to build out something in Construct before I felt comfortable deploying projects in the wild. I

0% is \x08\x22\x01\x00\x00\x00\xD5 and 35% is \x08\x22\x01\x00\x00\x23\xB2.

Currently i am using Wake on Lan to turn on a Remote PC via VC-4. My code is working fine on Cp4 but now when i transfer the code to VC4 it doesn't turn On the PC. Is there any help I can have from

How you make the first initialization works? For me I need always to use C-Bus Diagnostic Utility, connect the?c-bus PC5500 and control it there, Once I can control it, I remove the cable connected

If it’s like the TSW-730/732 it shows up on a device extender (but I’m not opening SIMPL right now to say which one ;) ) – note that the switch short is from 24 to the input, not the input to

The webpage indicates that it has 2 Occ. sensor inputs. looking in SMW I don't see any triggers into the program (maybe I missed it??) It may be something dedicated to some built-in app function... I

Need a Network guy that knows Cisco , ?asap in Houston area.

OK will give that a shot thanks, Really only need direct set for volume all the way down @0 and another one for like 35 percent

EX-Link,Lincoln

A NEW CHALLENGER APPEARS!

This one? -?https://greenpointtdi.com/product/gp-nvx-manager/

CH is about as good as System Builder is about as good as Construct. Do yourself a favour and use SIMPL and VTPro.

System Builder SUX? From: <[email protected]> on behalf of XSDS <xsdesignstudios@...> Reply-To: <[email protected]> Date: Tuesday, February 6, 2024 at 6:49 AM To: <[email protected]> Subject:

Truer statements have never been made.

Looks like for Ex-Link direct set is `\x08\x22\x01\x00\x00\xYY\xZZ` where YY is 00 to 64 (0% to 100%) and ZZ is the checksum (which you'll have to calculate for each volume level). For MDC it's

I have 2-310’s running with CH. 70% of the time, they work every time. That said, they do fail to connect or otherwise “Lock-Up” and require human interactions to reconnect them. Response time

The TSR-310’s I have deployed are all using the latest firmware that was supposed to resolve the waking and latency issues. My major gripe is the latency on when sending a command, pause, play,