开云体育

Subject says it all.? I want to send a command to a SWAMP

**I* *edited* *this to reflect some of the conversations in* *response* *to this post... * Crestron EISC (Ethernet Intersystem Communication) can be a confusing thing to some. I know it was to me, but

hello group, does anyone has experienced a "lost" device in xiocloud? I was using a vc4 on trial mode, and after the trial period, I've already purchased the license for 1 room, and now that I want to

Yes, that's what I've done historically also...basic low-rent manual labor to get things into the parameters. I haven't found any way to simplify things, though QSX eliminates the ability to

4.0002.00039

I use a password module that uses file operations in s+ and haven't noticed any issues.? What version of VC-4 are you running?

For all my lutron jobs I have the lighting logic in a separate slot which I start out with a template program. 32 rooms worth of modules with 18 lighting loads per room. I have all the href_IDs set at

Ive done a couple QSX with room counts in the 20s and I havent experienced any issues. I'm just pulsing the Connect signal at startup and dont use the Disconnect signal. Using v1.1 modules here.

Aren't Vantage's VIDs handled exactly like QSX?

Oh geez... its even broken the regular password module because it also saves string to memory.

Sorry, I was driving during that last post. When the tv is in art mode and you power it off, it will still be in art mode when you power it back on. At that point you can send the art mode off or an

Hi All, For those who've integrated with QSX so far, have you found any methodologies to create a faster, more efficient CopyPaste/SearchReplace process? With the issues that I've just found with QSX

Answering my own question...in a word...YES...:( And not in a good way, IMO...

Thanks Nico!? System is big (32 rooms) but not that big...

Yeah, EX-Link is likely how we'll go? - hoping you're right and that it will work well and KEEP WORKING!...Haha So do you mean that the ART MODE command is like an input - i.e. the TV stays ON to

Nice! Our issue is when (using IR) the room has been turned off (Art Mode),? the unit goes to the art, but when the client uses the all house off, that room gets another power off trigger, which

I have been using exlink. It works well. You will need to take it out of at mode when powering it in though. An input command works

I provide a setup page to "toggle" between art mode or actual power off when the TV is turned off. All it does is fire either the regular power off command (Art mode) or I send the power off command

Yeah, I just got off the phone with Samsung CI support and they confirmed that there's no discrete Art mode command...:(? ?Lame-O We're going to try EX-Link, which has discrete commands, though I've

Not confident to say there isnt one, I just know this is what I have always done.