开云体育

Tried these command sand they didn’t work. Very unusual. Only the \x01 starting commands work. Must be different commands in this camera. thank your for your help and response though

Sorry this will work

in visca serial entry in the SRGX module you need to send: Preset1: \x8x\01\04\3F\02\00\FF Preset2: \x8x\01\04\3F\02\01\FF Preset3: \x8x\01\04\3F\02\02\FF

I’ve tried the \x8x commands and none work. the commands from the module started with \x01

Yes SGRX you can send direct command in the visca input, work great !

Did you use a module from the application market? there’s a dip switch with http or rtsp but no udp dip switch

I do and SRG-A last week and there is a switch on the camera for UDP control

Hi Jeremy, Did anyone ever get back to you?? I'm using Visca over IP commands but can't get the Crestron VC4-PC3 to connect on UDP Port 52381. -- Doug G

Hi Ben, what do you mean by the jumper? I have a cable in the Lan and PTZ controls are working g but presets aren’t.

Did you put the jumper in the good position?

I was thinking I might just add in a few fake boxes to make these gaps, though I assume it would whine about that since they would be missing. Last night, I adopted 4 units into Director as a test 2x2

Hi All, Has anyone had experience controlling the Sony SRG X400 cameras? I’ve tried using the?Sony_BRC-X400_SRG-X_series module on the application market. Couldn’t get it to control via UDP. I

Yes, you can edit the XML and it doesn't have to be condensed to a single line. No, you cannot have gaps, which is really annoying, especially if you tend to organize things in groups and leave room

Ha! Alex, that's essentially what a friend of ours (you know who) said.? i.e. Apple must know what's best...? ? Oh, boy!! "Don't want anything to cut into my Ahsoka watching tonight!" Yes!! I'm two

Hi All, We have some larger rooms to do with the Flex/ZoomRoom UC-engine systems and need some recommendations for independent mic/speaker/DSP-echo cancel set ups. Room types in question are: - Larger

Hey Phil, Did you end up doing anything with these as I have just run across one, I've grabbed the protocol document and am having a look at the moment, any advise would be much appreciated. Regardfs

I'm commissioning a pair of DM-NVX-DIR-ENT in a large NVX deployment. I've got a massive spreadsheet with locations, IP addresses, MACs, hostnames, etc that we've been using to keep track of where all

OBVIOUSLY "you're holding it wrong", lol. Seriously though, I haven't heard of anyone experiencing this issue yet and we have apple TV's on almost every single job. I will update one of my personal

Unfortunately, repeat is already set to '1'...

If this is a standard crestron IR file you can edit the number of repeats the code sends out on each individual press in toolbox and try testing the new code. Sometimes the default minimum can be