开云体育

It's a bug. They know about it. I reported it to TB and they were like "we're aware of this as of several weeks ago," so I imagine lots of people have said something about it. I'm probably going to be

We have a large?Crestron?installation communicating with 4 Tridium Niagara Jace's through BACnet. 3 of the Jace's work obsoletely fine. The main Jace however is extremally busy and we are seeing

There is a company in the UK, who we have used for many years, and also were used by Crestron. They specalise in engraving Crestron buttons. Evans Graphics Graham Poole *Engraving Manager* T: 01628

Since I am not a dealer myself, I guess I will have to sell it to eBay land. Was hoping to give dealers the opportunity too but i know those groups are meant only for dealers and not those of us that

Hi Yevhen, I have a combo CNC, laser engraver, and 3D printer.? I have never tried engraving Keypad buttons myself.? However, you need to remember that not only do you need to figure out the correct

Jay, thanks for your reply. The idea is cool, but there are some nuances: 1. The project, I and the buttons are currently in France and sending the buttons to the USA and then waiting back will be a

I can't provide any information on doing the engraving yourself. However, you might want to contact laser engraver pro (https://laserengraverpro.com/).? He doesn't normally engrave Crestron buttons

This is a new bug. I’ve noticed this a couple times as well recently. But it doesn’t seem to be always an issue. Haven’t tried to figure out any pattern to it yet

You’ve likely got a colorspace Mismatch. You said it’s only on direct tv so it’s probably that hdmi input. Try rebooting the directv itself first to see if it re-negotiates properly by itself.

Good day, Colleagues! Has anyone had experience laser engraving the Crestron C2N-CBF-P-B-T control panel buttons themselves? Now there are about 70 of them in the project, but they have already been

Depends on whether you will sell it to anybody or just want to sell to other dealers. https://www.facebook.com/groups/293676642826406 Crestron Exchange is a private groupon facebook.

I use to be you type the symbol name hit enter and it would add the symbol and then clear the symbol name and then you could type another and hit enter.? now it doesn't clear.? I have this issue

Lutron https://www.lutron.com/en-US/Products/Pages/StandAloneControls/Wallplates-Accessories/Designer.aspx#Colors Can't remember which exact color matches the Latte in their satin finish.

Seems to be only for the DirecTV that they are watch at the moment on just this endpoint. The area has 3 endpoints and the other 2 are fine.? I change the stream address to the NVR and its fine.? Go

Sent you a private email with some stuff...

Hello All, I need to add some user preset recalls for a VPL-GTZ380 projector, I am using the VPL-VW1000ES module from the application market place (basic controls I need work fine), does anyone have

Does anyone here have files that they would be willing to share. Trying to use RV-C to communicate with a motorhome. Its all CAN based. Have the pcan 232 adapter

The main problem in my case is that if you have a team of people periodically checking the "status on things" with the terminal it also causes a "notice stamp" every time you connect, which in turn

Just to provide closure on this... the issue ended up being a CWS bug when running on processors with routers (AV4, PRO4). Anyway, if you ever run into this, now you know. Crestron has sent me some

You can order a color sample? ring from them. I can not remember the part number I have a couple.