开云体育

Make an offer. Location NZ Tim Greenbank Control Systems Engineer

Currently connected via TCP/IP through port 5555 (ADB port) Even though the TCP/IP connection is established, I'm not sure if my AP4 processor is talking (or established handshake) to the TV, as I

Hey Rob. We are def interested in the Pro2 and the client said how about $75 for both? He has a running 8x. I have been working around the System Builder program for 5 years because he didn't have a

I had this happen a few times over the past few months. Some had NVX others didn't. We found by replacing the balun it fixed our issues. I can't remember what balun we were using, but I think it was

What was the connection type?

Send me an email offline... Chris at eicustom dotcom TIA

I have some progress with ADB, I managed to connect to my Andriod TV via ADB (Andriod Debug Bridge), that's easy. Once connected, I managed to send remote control keystroke commands to the TV too. adb

I've got an GC iTach IP2SL and GC iTach IP2IR for sale. Both are brand new never used (but open box). If anyone is interested please let me know.

These ones should work: https://files.remotecentral.com/library/3-1/sonos/index.html

OK the IP address was probably my problem.? I wasn't present for the setup of the B&O and I don't know where the IP address of the soundbar is located.? I'll obviously want to set it static either

Since I was in a hurry, I opened all the ports except the one for Spotify Connect and System updates.

That’s very interesting could you share those IR commands? Thanks

There is a discrete TV input IR command for the sonos sound bars. ?It works perfectly and is the only reliable way I have been able to implement the above scenario.

Did you open all of the app control ports or did you spend the time to figure out what was needed?

I normally use serial on Samsung Art TV's. On the ones that I have to use IR, I use the discrete power commands to power the TV on and off. I then use the power toggle to enter art mode.

You may want to try an EDID minder between the NVX and the AVR, that has solved similar past situations I have been involved with. (But certainly go through the troubleshooting steps to see if the

From a network pentesters pov is it possible to raw replay packets from the crestron side now. Aka capture and send by sniffing the app

We have a requirement to integrate Sonos Beams into 6 bedrooms. Setup is as follows: Watch: * Sony Bravia TV * Local Apple TV plugged into the Bravia * Head-end satellite sources * Head-end Bluray *

I’m glad it's working for you Thanks Jay

I figured it out, I was testing using the single setpoint input, and Ecobee doesn't support that. When I started using the heat and cool setpoint inputs it worked like a champ. An analog increment