开云体育

There is a discrete TV input IR command for the sonos sound bars. ?It works perfectly and is the only reliable way I have been able to implement the above scenario.

Did you open all of the app control ports or did you spend the time to figure out what was needed?

I normally use serial on Samsung Art TV's. On the ones that I have to use IR, I use the discrete power commands to power the TV on and off. I then use the power toggle to enter art mode.

You may want to try an EDID minder between the NVX and the AVR, that has solved similar past situations I have been involved with. (But certainly go through the troubleshooting steps to see if the

From a network pentesters pov is it possible to raw replay packets from the crestron side now. Aka capture and send by sniffing the app

We have a requirement to integrate Sonos Beams into 6 bedrooms. Setup is as follows: Watch: * Sony Bravia TV * Local Apple TV plugged into the Bravia * Head-end satellite sources * Head-end Bluray *

I’m glad it's working for you Thanks Jay

I figured it out, I was testing using the single setpoint input, and Ecobee doesn't support that. When I started using the heat and cool setpoint inputs it worked like a champ. An analog increment

Hi Jim Yes, we have integrated a Harmony with Crestron. There is a Crestron module available to download from B&O that works very well. You just have to be careful to use the IP address of the sound

Will do. I need to check with the client. Also may want the 8x. Thnx.

Gary I haven’t personally had an ecobee to test with but if you send me a email I can work with you to figure out how to resolve the problem. Jay dot m dot basen at gmail Jay

I'm trying to control some Ecobee stats using Jay's Hubitat module, I have feedback from the stats and control of the mode and fan. As of yet I can not change the setpoint. Does anyone know what the

You might try sending the 363 output directly through the extender, bypassing AVR, as another step in isolating the roadblock. From: <[email protected]> on behalf of John Gabler

And I thought I'd never have to work with B&O again. So a client just had this land at their house and the guy that came out and set it up said "sure it integrates with Crestron, no problem".? He

Are you getting audio from the AVR, just no video to the display? or are you not even getting audio? +1 for Mike's idea of a local display and also checking the preview...

Typically we use dedicated NVX per endpoint. One for TV, one for AVR/Processor, so that we dont have to deal with any HDMI Extender issues. However we've done plenty of systems where the NVX sits

I have a NVX-363 feeding a Arcam AVR to Sony Display via AVPRO EDGE Balun.? All my local source display fine.? But distro source don't display at all.? I can see the 363 is getting the stream, just

Hey Scott, I've got one if you're still in need. Shoot me an offer. Pro2 C2ENET-2 (3) C2COM-3 2GB CF Memory Expansion I've also got a TPMC-10 and a TPMC-8X both with docking stations and power

About the only easy way you can increase the number of repeats beyond what Crestron allows is to hold the IR input high in your program using something like the pulse stretching symbol.? However,

Hey Brian, i did see the documentation for that and it looks rather interesting. I’m working under another programmer however who seemed reluctant to use that when I brought it up.