¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date
Re: Q_SYS Crestron Certified Modules version 5.0 and 5.1 #cp4 #q-sys
Those modules are not so great. I have a set of modules I wrote for qsys l. When I get home I¡¯ll see if I can figure out how to send it your way. Cheers Natalie
By Natalie Jackman · #249148 ·
Re: Q_SYS Crestron Certified Modules version 5.0 and 5.1 #cp4 #q-sys
I am getting the following error in the error log: 57. Error: SimplPlus[App02] # 2023-02-13 17:52:48 # Module S-2.1.2.5.2.22.2.1:S-1 : Q_SYS_Named_Control_Object_V5_0 at line 141: Unhandled Exception:
By Matt Jones · #249147 ·
Re: VC-4 USB Ethernet no longer possible #vc4
That¡¯s is not something I have heard. just checked the discord channel as well and see no refyto that
By cmac_HT · #249146 ·
VC-4 USB Ethernet no longer possible #vc4
I was just told that the (apparently) short lived option to use a second NIC on VC-4 is no longer supported, and that updating VC-4 will break existing installations that are configured in that way.
By Mike Taylor · #249145 ·
Re: Steamist port for communication
So, apparently they had a control failure of the TSC-450.? Steamist supplied a TSC-550 in return.? No longer uses the wifi bridge as wifi is built in to the 550.? Now I don't seem to get any fb.?
By John Gabler · #249144 ·
Re: HTML5/CH5 WYSIWYG Editor for the Crestron control system #html5 #ch5
I can't register. Every time receive error message.
By Yevhen · #249143 ·
Evertz NUC=AV-100 session manager
Just got some projects with this. Has anyone controlled the Session Manager before/ I have a call into Evertz to get API into, just checking here with the group to see if anyone has experience with
By Tray Schaeffer · #249141 ·
Re: Console command(s) for changing a CRESNET device's Serial Number/TSID #cp4r
I'm connected to just one dimmer module through my CP4-Rs CRESNET port. And nothing, manually changing its CRESNET ID sadly doesn't do anything, it changes to the one I want, and then when I hit
By David Chramcow · #249140 ·
Poly "Partner Mode" - external control?
I'm going to have a G7500 that will be set up as a Zoom Room in "Partner Mode".? Is there *any* control (presumably through the RESTful API) of the device when it is functioning in Zoom Room mode??
By Phil Bridges · #249139 ·
Re: Console command(s) for changing a CRESNET device's Serial Number/TSID #cp4r
I would try one device at a time. Disconnect all of the devices but one. Then try assigning cresnet id's with toolbox.
By Macross · #249138 ·
Re: BSS BLU Matrix Router
Does anyone know if the router control will take an InputValue of 0d to force an unroute if the Route input is held high? Or do you need to feed it the same InputValue as the ActualRoute value and
By BruteForceIsUnderRated · #249137 ·
Console command(s) for changing a CRESNET device's Serial Number/TSID #cp4r
Currently having lots of issues making a CP4-R assign valid cresnet IDs to several GLXX-2DIM8 units. The CP4-R is currently reading all the GLXX-2DIM8 units as the same. Crestron rep told me that he's
By David Chramcow · #249136 ·
Re: HTML5/CH5 WYSIWYG Editor for the Crestron control system #html5 #ch5
I like it. Very nice. Only been playing for a couple minutes but very impressive.
By paul lipp · #249135 ·
Re: Firmware update issues with 3-series
Don't even get me started about the internal router!...:) I understand that there are applications for it, but I stopped spec'ing AVx and PROx (and CPxN) processors a while ago because of 'enhanced'
By ckangis · #249134 ·
Re: Cisco Touch 10 Layout
Oh, that's gold thanks! Don't know why this never popped-up on a google search.
By Olivier Royer · #249133 ·
Re: Firmware update issues with 3-series
Oh I thought you had tried Betacleanup already. I have had that fix an issue for me on a CP3 where the webserver would never run, and an Init and/or Restore wouldnt fix that. Well at least and at last
By @johnmax · #249132 ·
Re: Firmware update issues with 3-series
Yes, the issue I experienced was that AV3 did not get the router configuration properly and also the problem with the discover symbol on fusion i tried to do this step, and it worked and now
By Ady Agung Syahputra · #249131 ·
Re: Firmware update issues with 3-series
Well this process finally did it!!? thanks for the suggestion, Ady!? ?FTR, TB support guy I was working with who was seeing the same issue on his CP3 said he tried BETACLEANUP in addition to other
By ckangis · #249130 ·
Re: Firmware update issues with 3-series
Hi, Try this 3 commands to get a comprehensive back to fresh out-of-the-box state. INITIALIZE to clear loaded files (programs, web pages, app project files, etc.). RESTORE to return settings to
By Ady Agung Syahputra · #249129 ·
Re: Firmware update issues with 3-series
Tried INITIALIZE, Puf All...nope. RESTORE, Puf All...Nope...
By ckangis · #249128 ·