开云体育

I think I have a solution for most of my problem here,? I dug up an old D3Pro project that had 6btns on it and got an engraving file out of there. Next, I took it and put it into a different project

John, This is not directly related to your specific symptoms, but I've found that a lot of quasi-tech devices like this have an issue with Wifi SSIDs that supply both 2.4 and 5g. If you haven't

Only on Pc3?

It's been awhile since I tested, but I don't believe there is much control available. You have access to the commands that change the modes on the unit and query what mode it is in, etc... But nothing

My latest article, "How Amazon’s Struggles May Affect Smart Home Owners” is being published by the good folks at Residential Tech Today Magazine on their web site. This article looks at recent

True Blue verbally confirmed this last week on a support call I was on, currently no support of dual NIC VC-4-PC-3. With that being said, they still hung out and got it working properly to my

There was previously a script that could be run to set up the second NIC as a control subnet. I used this in one conference room and had a lot of issues that True Blue ended up having to fix. Went to

You should be able to assign a zero value and route,

Hm, works for me (just registered today). Cheers, Thorsten

Those modules are not so great. I have a set of modules I wrote for qsys l. When I get home I’ll see if I can figure out how to send it your way. Cheers Natalie

I am getting the following error in the error log: 57. Error: SimplPlus[App02] # 2023-02-13 17:52:48 # Module S-2.1.2.5.2.22.2.1:S-1 : Q_SYS_Named_Control_Object_V5_0 at line 141: Unhandled Exception:

That’s is not something I have heard. just checked the discord channel as well and see no refyto that

I was just told that the (apparently) short lived option to use a second NIC on VC-4 is no longer supported, and that updating VC-4 will break existing installations that are configured in that way.

So, apparently they had a control failure of the TSC-450.? Steamist supplied a TSC-550 in return.? No longer uses the wifi bridge as wifi is built in to the 550.? Now I don't seem to get any fb.?

I can't register. Every time receive error message.

Just got some projects with this. Has anyone controlled the Session Manager before/ I have a call into Evertz to get API into, just checking here with the group to see if anyone has experience with

I'm connected to just one dimmer module through my CP4-Rs CRESNET port. And nothing, manually changing its CRESNET ID sadly doesn't do anything, it changes to the one I want, and then when I hit

I'm going to have a G7500 that will be set up as a Zoom Room in "Partner Mode".? Is there *any* control (presumably through the RESTful API) of the device when it is functioning in Zoom Room mode??

I would try one device at a time. Disconnect all of the devices but one. Then try assigning cresnet id's with toolbox.

Does anyone know if the router control will take an InputValue of 0d to force an unroute if the Route input is held high? Or do you need to feed it the same InputValue as the ActualRoute value and