开云体育

Thanks Anthony. This really came through. Even though the tst wifi cannot be added into an rmc4 ethernet devices slot, I had to? use an rmc3 processor in simpl windows so that I can be able to add

I’ve got one Gateway if you want and TST902 to sell

Got it! I was erroneously thinking that the port # on the toolbox address entry was the 49300 port... but now I know that it was supposed to be the HTTPS port instead. The "Port(if not default)" does

Dear Crestron Team, Like many of us in the Crestron World, I have numerous used but functioning equipment such as: * Pro 2, MC2e Processors * Multi-Channel 16 X 60 & 12 X 60 Amps * Surround Sound

Crestron dealer here.? I'm looking for 5 CLX-2DIMU8 modules.? If anyone has any of them they're willing to part with, I would greatly appreciate it.? I realize this is probably a fruitless effort,

Ressurecting an old thread, sorry. Yes, I understand the advantages of controlling a Crestron system via the Cisco touch 10 but how? Where is the documentation for that, adding buttons, setting up

I've added the .tio files and instructions on how to do this in a zip file here.? Just search for tst-902 or try this link:

Hear how it works. There are files supplied by Crestron that is loaded to the programmers pc that installs a WiFi definition for the TST-902.

I would also like to know the answer to this. I've only ever installed a few of these. Seems like you have to have a gateway for control, but it has built-in Wi-Fi that can't be used for control.

I just mocked this up with no issue.? You probably can't forward 443, nor should you.? Pick a random port and setup your router to forward that to 443.? Also forward 49300, as you have already.?

Yes. You can run it over WiFi. Call TB and they will help you. Files were circulating either here, or in the facebook group.

Hi guys, I have project where the touch screen is the wireless tst902 and the processor is an RMC4.Am aware that we have to have a crestron ER gateway so as to use the touch screen with this

Maybe mentioned before, but what about a recompile/upload after upgrade.

I found the command to read current routes,?DUMPDMROUTEINFO.? The output is not easy to parse but it can be done.

I'm building a remote control module to make routes on a DM using Stream Deck / Companion. https://github.com/bitfocus/companion-module-crestron-digitalmatrix/blob/main/HELP.md I'm using telnet

I am trying to figure out what type of port forwarding I need to do on the network to make Simpl Debugger work with VC-4. This is not a question on how to use SIMPL Debugger with VC-4 on a local

Turns out the device was just used by Legrand, http://67.205.146.177/books/ rs-232-dmx-engine/chapter/ command-syntax ( http://67.205.146.177/books/rs-232-dmx-engine/chapter/command-syntax ) They have

You only need the filename when there's more than one puf file in the directory.

If you see the same black cat cross your path twice in a row, it's a glitch in the Matrix, and a pretty good sign you're running in virtual. Sorry.. there's a GetModelNumber() function in SIMPL+ that

https://www.enttec.com/product/din/ethernet-to-dmx-rdm-adapter/ I have used this product to directly convert sACN to dmx for control of simple dmx fixtures LED color changing soffits etc.--if it's