Hear how it works. There are files supplied by Crestron that is loaded to the programmers pc that installs a WiFi definition for the TST-902.?
On the TST-902 there are some commands that need to be issued to disable the infinet and add a IPT entry.
toggle quoted message
Show quoted text
On Feb 10, 2023, at 8:47 AM, Vance Gregory <vncgregory@...> wrote:
?
I would also like to know the answer to this. I've only ever installed a few of these.
Seems like you have to have a gateway for control, but it has built-in Wi-Fi that can't be used for control.
Never understood this. I could understand needing the gateway maybe for initial installation and configuration, but then once the tst gets an IP address, why couldn't
you let it control a processor by IP ?
Hi guys, I have project where the touch screen is the wireless tst902 and the processor is an RMC4.Am aware that we have to have a crestron ER gateway so as to use the touch screen with this processor, however due to the unavailability of devices and crazy etas, i was wondering if there was a work around to use the touch screen and the RMC4 without the gateway since the project is due very soon.
