开云体育

Charliehibbins, you were on the money. Updated the firmware on the RMC4 from 4.45 to 4.8 and it finally roared into life ? Thanks for helping, All!

No licence for lutron any more Regards Bruce

thanks.? I will give that a try.? Would you happen to know off the top of your head if source 7 is still the HDMI input (as it is on the roomview connected display symbol)?

That's interesting. I'll have a look at the firmware issue as I'm using an RMC4!

If using a MSEND how is language converted. I wasn't aware that the properties included language change. I can convert text using Google Translator and using Copy/Paste into a MSEND but that loses the

I'm doing this for more than 10 years too and I was doing Extron before. I'm an electronics technician so when I started working with Crestron it was instantaneous, It brought me back in the '80s and

It'll click sooner than you think.? A great resource, really the only one for beginners (besides actual Crestron training) is https://www.youtube.com/c/OverWorkedLogic/videos I've been doing this for

Here's a screen shot ( https://www.dropbox.com/s/6dzdidbxpv9akl5/Example1.jpg?dl=0 ) of a basic way to do it. Use the signal of the toggle to send to your TSW for feedback. What you do with the

I notice the answer ID has been updated (6th December '22) and now states: CAUTION:?This procedure is permanent. Pretty sure it originally gave instructions on reverting the change, which basically

As far as I know, you only need a license on certain 3 series processors manufactured during a certain period of time, maybe 2019 ish?

Maybe try the Crestron Connected Display symbol vs the Roomview Connected Display symbol. The Crestron Connected Display symbol includes lamp hour outputs.

Also, if the rec is to use the PJ Link module noted above, does anyone know which of the input types are now used for HDMI inputs?? Choices:? RGB, Video, Digital, Storage, or Network... TIA!!

I didn't think that was still a thing on more recent FW for 3-series, and even less on 4-series. Can someone confirm?

As it turns out, I have a project with a VMZ51 coming up and was going to post about the 'Crestron Connected Display'. Is the consensus to use the PJ-link module vs trying to use the CCD?? I don't

There was/is a version of crestron firmware (I was doing it on a PRO4, not sure if 3 series are affected) that broke the Lutron integration. I can't remember the exact firmware version to avoid and

Hi Leonardo, I am currently struggling with communication between Crestron and Lutron QSX also so thought I'd reply. As far as I understand, you enter the command processor id appropriately (Probably

You could always look for an older 3 series processor as well

I think the crestron processor needs a licence for lutron and without the license installed will block ip control of any device with a MAC address that belongs to Lutrons MAC range

Hi Guys any one can help me how to control Lutronx QSX i used the module from application market and set all the parameters needed like username/password IP address of the lutron processor and follow

Great. Thanks for the help I will try these options