开云体育

Hi Mike, Did you get any closer to controlling the E70 Cam? Regards Flemming

@ckangis - see if you can upgrade your project to the new Cinema 70s. Much better unit than the? bottom of the line 1510. There is also the Extron SSP200.

Hi, there?s also the nexgentec NGTC-MCP4K: https://www.nexgentec.eu/products/interfaces/ngtc-mcp4k/ 1HE, half rack width. Cheers, Thorsten -----Ursprüngliche Nachricht----- Von: [email protected]

Hi Chris, Have you checked out the Artison Backpack P5? It’s only 5.1, but super slim (designed to go behind a tv) and the control is solid (we’ve done a module for it). Cheers, Oliver

We have used a few of the Marantz slim AV amps with IP control, and never an issue, BUT we have only ever asked for simple one way commands 0/1, source, volume,mute etc. The Artison Backpack 5 is also

Just a follow-up with this subject, as I have a project with NR1510's coming up... - Anyone had any real issues with IP control of the NR1510 units? - Also, are there any other recommended 'Slim-Line'

Human hearing might be logarithmic but your eyes are not. Moving the fader from 80 to 90% will result in dramatic volume change, that the fader movement does not represent. If I was coding it for

If you have video distribution, many can send IR direct like Binary MoIP and AV Proedge.? Our sales team still prefer Samsung TVs where IP control is a pain, so we still do IR for that.??I have

I'm not aware of any information at this time, other than?Crestron being a member. "Participant Members contribute to and develop standards they will later adopt and use. Participants can access

Hi Folks, human hearing uses logarithmic scale, therefore a logarithmic volume control should be used. The dB scale is logarithmic, therefore does the job well. However, if you want to adjust volume

People still use IR? (ducks and runs) Aside from an EISC or slave (can you slave a 2-series to VC4…hmm?) an old processor if you have an old fully caffeinated DM-RMC handy (DM-RMC-100, DM-RMC-100-C,

I've seen the issue with AppleTV (and Roku as that goes) not streaming certain content in the past. Just had a case a few weeks ago where the Apple TV would have sound but no picture when streaming

I have a VC4 sitting in my office that I've not even hooked up yet. I was planning on using Global Cache IP2IR for this. GC are solid devices - use them a lot. A bit more involved than using Crestron

It sounds bad, but several dealers I work with are simply using old 2-series processors for relays and IR ports. Global Cache is another option, but programming and troubleshooting is a LOT simpler

I have a few projects that I can't get processors for and the only thing holding me back from doing VC4 on them is I need IR. The CEN-IO-IR is back-order as long as the processor is, so what products

Hi, i had to hook up an old 1.4 projector while waiting for our final showroom device and wasn?t able to play anything with a ATV 4K connected to the system (Trinnov Altitude32 preprocessor, then

Hi Chris, responding to the list since you didn?t reply to me after sending the protocol description to you: Did my email went out to you (or probably being stuck in SPAM?)? Cheers, Thorsten Von:

I use some combination of log, antilog and scalers in between. Result is, fader on TP is at around 50% when DSP level is at 80%, making higher volumes levels less "sensitive" when using fader.

Actually, my client is a fully fledged audio engineer and electronics engineer who regularly operates similar venues (a stadium in this case). Bose is handling back of house and function spaces. The

I don't think you're doing anything stupid or ignorant here. In cases where you get a black screen with subtitles that are visible, the ATV clearly isn't sending 1080P / 4K / HDR to a device that