开云体育

It took some digging a few months back, I believe it was in the manual, I don't remember where I got it.? If you ssh into the box and type journalctl -u virtualcontrol -f -all you can watch these

I was playing around with a web based console program I wrote. ?I could get print statements to work and was able to get it to allow input of console commands that I added to the S#Pro program. ?

I know that CrestronConsole.PrintLine (I don't know about SIMPL+ PRINT or TRACE) definitely shows up in the syslog, so it's not completely gone.

So, a quick update on this. Using the offline extender, I close the video subpages as soon as the iPad goes offline (task switch or power off iPad) When the app is back in focus it re-connects quickly

What Cisco hardware/firmware? Does joining a Teams meeting using the codec web interface work? As far as I'm aware Teams does not yet work on Cisco hardware, there is a press release about integrating

I'm currently working on a project that requires embedded video on iPad. Done loads of these in the past with few(ish) issues. Here's a new one: With the Embedded Video subpage active on the iPad: *

This is currently a known issue with iOS16: https://support.crestron.com/app/answers/detail/a_id/1001767/

I have always been a fan of the good old method of printing stuff to console for some basic debugging and even some exception handling (in addition to saving to a log file etc)...? But as we all

I don't like the 4232CBM, primarily because there's no discrete zone status feedback. You can somewhat trigger things using an SIO connected to the keypad display, but that leaves a lot to be desired.

I just upgraded my iPhone to a 14 and after setting everything up the Crestron Go APP is locking up every time I rotate the phone. I have tried to lock rotation and lock configuration. It still tries

Awesome, thanks for the help guys. I'll be implementing next week and will update with how well it works. I've done a bunch of the 128/250's but this is the first time I've come across this model.

a. The Vista-21 iPSIA is just a Vista-20 with an IP communications board that speaks specifically SIA protocol. b. as Tony mentioned, it uses the CBM module, which I've heard is not great - we've

It uses the 4232CBM serial adapter, and accompanying Simpl module.

I'm supposed to program a?Honeywell Vista-21iPSIA in SIMPL and I can't find a module or anything indicating the existence of a module. I do however see that this model is listed as compatible with

Cisco Room Devices v3.4 ( https://applicationmarket.crestron.com/cisco-room-devices-v3-4/ ) was released Jul.2019 for use with DB v115 or below. Cisco Room Devices v4.0 (

I second this service!

hi everyone i use cisco room devices 3.4 and xhen i receive a meeting invitation from teams i can't join the meeting. when i click on the ''JoinActiveBooking''button, nothing happens. what could be

The CCD SDK (the SDK required for extension devices in Crestron Home) doesn't provide access to the general processor hardware directly, but you could write a driver to fire events and hook it up that

Hello math leenen I have run the program and I have try to send command through simpl dibugger? to switch for 4 channel knx actuator but? command not execute and actuator not perform task kindly

This service should be able to take care of it... https://www.tbdenterprises.ca/product/newtonsoft-module-update-service