开云体育

Hi, Has anyone ever used a Crestron MTR Flex System with a third party Processor (i.e Extron, Kramer etc)?

Hard to say as it, again, functions properly about 1/2 the time.? Late yesterday I replaced the Sat Driver with the one specifically listed for Genie 4K models and it made no difference. There is a

We've had a fair share of Apple TV audio issues over the years as well and troubleshot in similar ways. If someone has the special sauce to get the most out of everything, I'd also love to know.

Yea we ended up going from a #if_Series3 to doing #if_Series2 / #else and that stopped the errors on the S+ compile. My gripe was that if you never opened up S+ and just compiled in Simpl for a 4

Yup, I understand, that how I ended up writing my own years back. I did learn a lot about the protocol in the process, so I’m happy to help if I can. Dave Sent: Tuesday, September 6, 2022 6:39 PM

Thanks Dave! Yeah, I'm bound and determined to figure this out, even if I have to write/re-write things myself...:) What's weird is that the MV commands that we send are just two digit (we don't care

Hi Chris, I believe that your assumption is correct. MVMAX should be the value of Volume Limit as set in the AVR and it should not change until the setting in the AVR is changed, This is how is worked

Hi Dave, If my assumption is correct that MVMAX is supposed to be the max volume allowed, there there's definitely something wrong with the feedback as the AVR 'Limit' is set to OFF and thus should

Is it that the TV/AVR Power On/Switching is not functioning properly or could it be that the DTV client is either Asleep or not syncing properly? I have not dealt with the new DTV clients, but I think

Has anyone had to control this lighting module?? Client wants variable (dimming) capabilities, but another contractor is providing the hardware.? I've only ever done Crestron lighting control, and

Bump...

Kiddies, Initial Turn On sequence with DTV 4K Client as the selected "Source" is rather flakey.? LG 55 OLEDB7P is being controlled via IP as is the Denon AVR.? Works correctly about 1/2 the time and

I was curious so I looked at the 1.1 module. It does use MVMAX to provide a volume gauge. The volume text is whatever was sent back in MV (displayed in db), BUT the volume gauge is computed using the

Has anyone ever worked on the Fusion Web page for the scheduler? I am trying to get info to help our admins and Vendor I am needing a "Important Notice" added for users to see when booking a room.

Yes, I've used the NVT product with x60 panels in the past with success... They have a new version: https://www.nvtphybridge.com/portfolio-item/nv-ec1701pls-bse/#tab-id-4 - I think that you could

Hi h2oskr2001 This module definitely handles the MVMAX command (Although there's no indication of it in the '21 protocol). Clearly it is causing issues, perhaps that the MV processing is getting

Thanks for clarifying that for me Jay

JohnMax, Yeah, we noticed this and tried a change (shown below, we Copy/pasted the 3-series logic and changed directive to 4-series). *Though it did not seem to make a difference with volume FB* , and

Hi Chris, It’s been a very long time since I looked at these AVRs, but I wrote my own module back in the 2010-2013 timeframe. At that point, the MVMAX response was not defined in the protocol docs

Does the S+ module within that you are using have a #IF_SERIES3 directive in it? I found a year ago that when compiling for a 4-Series processor that this directive gets ignored- in my module I have